222 Features n RoHS compliant* n Suitable for most types of soldering processes n Power rating at 70 C: CR2010 - 1/2 W, CR2512 - 1 W n Standard packaging on tape and reel n Tight tolerances of bottom electrode width n AEC-Q200 approval upon request n Three layer termination process with nickel barrier prevents leaching and provides excellent solderability CR2010/CR2512 - Chip Resistors Electrical Characteristics Derating Curve Model Model 100 Characteristic CR2010 CR2512 80 Power Rating 70 C 1/2 W 1 W 60 Operating Temperature Range -55 C to +155 C 40 Derated to 0 Load at +155 C 20 Maximum Working Voltage 200 V 0 -55 070 Maximum Overload Voltage 400 V 155 Ambient Temperature (C) Resistance Range: 1 % 10 ohms R 1M ohms E-96 + E-24 100 PPM/C 1M ohms < R 10M ohms For Standard Values Used in Capacitors, 200 PPM/C Inductors, and Resistors, click here. Resistance Range: 5 % 10 ohms R 10M ohms E-24 200 PPM/C Dimensional DrawingsDimensional Drawing 1 ohm R < 10 ohms 10M ohms < R 20M ohms I I 400 PPM/C 1 1 Zero Ohm Jumper <0.05 ohm 2 A/5 A 2 A/5 A Rated/Maximum Current H Chip Dimensions I I 2 2 W Dimension Model Model CR2010 CR2512 L 5.00 0.20 6.30 0.20 L MM (0.197 0.008) (0.248 0.008) DIMENSIONS: (INCHES) 2.50 0.20 3.10 0.20 W (0.098 0.008) (0.122 0.008) 0.60 0.10 0.60 0.15 H (0.024 0.004) (0.024 0.006) 0.60 0.25 0.60 0.25 I1 (0.024 0.010) (0.024 0.010) 0.60 0.25 0.60 0.25 I2 (0.024 0.010) (0.024 0.010) Performance Characteristics Test Limits DR Test Procedure Method 1 % 5 % -55 for 30 minutes, +155 for 30 minutes, Thermal Shock IEC60115-1-4.19 (0.5 % + 0.05 ) (1 % + 0.05 ) 5 cycles Short Time Overload 2.5 X rated voltage for 5 seconds IEC60115-1-4.13 (1 % + 0.05 ) Resistance to Solder Heat 270 5 for 10 1 seconds IEC60115-1-4.18 (0.5 % + 0.05 ) (1 % + 0.05 ) Resistance to Dry Heat 125 5 for 96 4 hours IEC60115-1-4.23.2 (1 % + 0.05 ) (2 % + 0.1 ) Rated voltage for 1000 hours, 70 , Load Life IEC60115-1-4.25.1 (1 % + 0.05 ) (3 % + 0.1 ) 1.5 hours ON, 0.5 hours OFF Rated voltage for 1000 hours, 40 2 , Load Life with Humidity IEC60115-1-4.24 (1 % + 0.05 ) (3 % + 0.1 ) 90~95 % RH, 1.5 hours ON, 0.5 hours OFF Solderability 245 5 , 2 0.5 seconds IEC60115-1-4.17 95 % of area covered Bending 3 mm IEC60115-1-4.33 (0.5 % + 0.05 ) (1 % + 0.05 ) Dielectric Withstanding -- IEC60115-1-4.7 >500 V Voltage Insulation Resistance 100 V IEC60115-1-4.6 1 G *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. *RoHS COMPLIANT VERSIONS AVAILABLE *RoHS COMPLIANT LEAD FREE LEAD FREE VERSIONS ARE RoHS COMPLIANT* Rated Power (%) CR2010/CR2512 - Chip Resistors How to Order CR 2010 - F X - 8252 E LF Model (CR = Chip Resistor) Size 2010 2512 Resistance Tolerance F = 1 % .............. Use with X TCR code only for values from 10 ohms through 1 megohm Use with W TCR code only for values from 1 megohm through 10 megohms J = 5 % .................Use with W TCR code for values from 10 ohms through 10 megohms Use with Z TCR code for values above 10 megohms through 20 megohms Use with / TCR code for zero ohm (jumper) and values from 1 ohm through 9.1 ohms. TCR (ppm/C) X = 100 W = 200 Z = 400 / = Used with J Resistance Tolerance code for zero ohm (jumper) and values from 1 ohm through 9.1 ohms. Resistance Value For 1 % Tolerance: <100 ohms...............R represents decimal point (example: 24R3 = 24.3 ohms) 100 ohms ...............First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5k W) For 5 % Tolerance: <10 ohms .............. R represents decimal point (example: 4R7 = 4.7 ohms) 10 ohms ............... First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470k ohms 000 = Jumper) Packaging E = Embossed Plastic Tape (4,000 pcs.) on 7 Plastic Reel Termination LF = Tin-plated (RoHS compliant) Soldering Profile for RoHS Compliant Chip Resistors and Arrays Marking Explanation 275 <1> Maximum of 20 seconds between 260 C peak Resistors with 5 % tolerance may have a +255 C and +260 C <1> 255 C 3-digit or 4-digit resistance code. Complete information about resistance 225 value and tolerance is found on the label 220 C of the reel of chip resistors. 190 C 5 %: 3 digits, first two digits are 60 - 90 seconds significant, third digit is number of 175 zeros to follow. Letter R is decimal point Ramp Down 150 C 6 C/second for values from 1 to 9.9 ohms. 5 %: 4 digits, first three digits are 125 significant, fourth digit is number of 60 - 120 seconds zeros to follow. Letter R is decimal point for values from 1 to 99.9 ohms. 10 seconds minimum 1 %: 4 digits, first three digits are 75 significant, fourth digit is number of Ramp Up zeros to follow. Letter R is decimal for 3 C/second maximum values from 1 to 99.9 ohms. 25 050 100 150 200 250 300 Time (seconds) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Temperature (C)