PEC11H-4220K-S0024 Bourns

Features n Push switch option n High detent torque n High rotational life and switch life n Metal bushing/shaft n RoHS compliant* PEC11H Series - 11 mm Encoder w/High Detent Force Electrical Characteristics Additional Information Output 2-bit quadrature code Click these links for more information: Closed Circuit Resistance 100 milliohms maximum Contact Rating 10 mA 5 VDC Insulation Resistance 100 megohms 250 VDC Dielectric Withstanding Voltage - Sea Level 300 VAC minimum PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT Electrical Travel Continuous LIBRARY Contact Bounce (60 RPM) 30 ms maximum** RPM (Operating) 60 maximum** Environmental Characteristics Operating Temperature Range -20 C to +70 C (-4 F to +158 F) Storage Temperature Range -35 C to +85 C (-31 F to +185 F) Humidity MIL-STD-202, Method 103B, Condition A Vibration 10~55~10 Hz / 1 min / Amplitude 15 mm Shock 100 G Rotational Life 100,000 cycles minimum IP Rating IP 40 Moisture Sensitivity Level 1 Mechanical Characteristics Mechanical Angle 360 continuous Torque Detent 210 70 gf-cm (20 01 oz-in) Mounting 70 N-cm (62 lb-in) maximum Shaft Strength (Push-Pull) 50 N (112 lbs) Weight 5 gm (017 oz) maximum Terminals Printed circuit board terminals Soldering Condition Wave Soldering Sn955/Ag28/Cu07 solder with no-clean flux: 260 C 5 C max for 3 1 seconds Hand Soldering Not recommended Hardware One flat washer and one mounting nut supplied with each encoder Switch Characteristics Switch Type Contact Push ON Momentary SPST Switch Life 30,000 actuations minimum Power Rating (Resistive Load) 10 mA at 5 V DC Switch Travel 05 0 3 mm Switch Actuation Force 610 306 gf (847 424 oz-in) WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Devices are tested using standard noise reduction filters. For optimum performance, designers should use noise reduction filters in their circuits. Specifications are subject to change without notice. Users should verify actual device performance in their specicfi applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus bourns.com CAUTION EMEA: Tel: +36 88 885 877 Email: eurocus bourns.com Do not store product in high temperature and humidity, direct sunlight and/or places where corrosive gases may The Americas: Tel: +1-951 781-5500 Email: americus bourns.com be generated. Please use product within 6 months from www.bourns.com the date of delivery and promptly after unpacking.Applications Level control, tuning and timer settings in: n Audio-visual equipment n Consumer electric appliances n Environmental controls n Musical instrumentation n Communications equipment PEC11H Series - 11 mm Encoder w/High Detent Force Product Dimensions PEC11H-4xxxF-Nxxxx 11.8 0.5 0.75 C 6.0 (.465) M7XP (.020) (.236) (.030) 4.5 +0/-0.05 2 PLCS. 12.8 2.0 2.2 +0.2/-0 (.177 +0/-.002) (.504) (.087 +.008/-0) (.079) 7.5 7.5 1.4 +0.2/-0 6.0 (.295) (.295) (.055 +.008/-0) F (.236) 6.0 DIA. A CHANNEL 1.0 +0.1/-0 AC B 3.0 AC B (.236) LB C COMMON (.039 +.004/-0) 5.0 (.118) B CHANNEL DIA. 3 PLCS. (.197) 6.5 L (.267) MOUNTING SURFACE P LB 1.0 C (.039) A L LB F P A C Dim. Tol. 18 TEETH 15 50 50 70 60 60 <100 03 KNURLED (591) (197) (197) (276) (236) (236) (<394) (012) 6.0 20 70 100 70 60 70 100 ~ 100 05 DIA. 0.8 (.236) L (787) (276) (394) (276) (236) (276) (394 ~ 3 937) (020) (.032) 25 70 120 120 100 110 MM (984) (276) (472) (472) (394) (433) DIMENSIONS: (INCHES) 13.6 (.535) 5.0 (.197) PEC11H-4xxxF-Sxxxx 12.8 11.8 (.465) (.504) 0.5 5.0 5.0 0.75 C 6.0 M7XP (.020) (.197) (.197) S W S W (.030) (.236) 4.5 +0/-0.05 2 PLCS. 2.2 +0.2/-0 2.0 7.0 (.177 +0/-.002) 7.0 (.087 +.008/-0) (.079) (.276) (.276) 7.5 7.5 1.4 +0.2/-0 6.0 (.295) (.295) DIA. (.055 +.008/-0) F (.236) A CHANNEL 6.0 0.5 0.3 1.0 +0.1/-0 AC B 3.0 AC B LB (.236) C COMMON 5.0 (.020 .012) (.039 +.004/-0) (.118) B CHANNEL (.197) SWITCH 6.5 DIA. 5 PLCS. L TRAVEL (.267) MOUNTING SURFACE 0.8 L LB F Dim. Tol. (.032) 15 50 50 <100 03 (591) (197) (197) (<394) (012) 13.6 20 70 100 100 ~ 100 05 (.535) (787) (276) (394) (394 ~ 3937) (020) 5.0 25 70 120 (.197) MM (984) (276) (472) DIMENSIONS: (INCHES) PEC11H-2xxxK-Sxxxx L 1.0 (.039) 11.8 13.5 8.0 9.5 P Specifications are subject to change without notice. (.465) 6.0 +0/-0.05 (.531) (.315) (.374) C 5.0 Users should verify actual device performance in their specific applications. (.236 +0/-.002) 2 PLCS. A DIA. (.197) The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and2.2 +0.2/-0 at www.bourns.com/docs/legal/disclaimer.pdf. 2.5 6.5 (.087 +.008/-0) S W (.098) (.256) 18 TEETH 12.0 KNURLED (.472) A C B 0.5 C 1.6 +0.2/-0 1.0 +0.1/-0 (.020) (.063 +.008/-0) 0.5 (.039 +.004/-0) 3/8 NEF (.020) DIA. 5 PLCS. A C B 2.0 A CHANNEL SWITCH 0.8 (.079) C COMMON TRAVEL (.032) 5.0 2.5 B CHANNEL 5.9 (.197) (.098) 14.0 (.232) (.551) MOUNTING SURFACE 0.5 C (.020) 3/8 NEF 4.5 +0/-0.05 (.177 +0/-.002) DIA. 6.0 +0/-.0.05 F (.236 +0/-.002) 9.5 0.5 (.374) (.020) SWITCH L TRAVEL MOUNTING SURFACE