PEC11R-4225F-S0024 Bourns

Features n Push switch option n Compact, rugged design n High reliability n Metal bushing/shaft n RoHS compliant* PEC11R Series - 12 mm Incremental Encoder Electrical Characteristics Additional Information Output 2-bit quadrature code Click these links for more information: Contact Rating 10 mA 5 VDC Insulation Resistance 100 megohms 250V DC Dielectric Withstanding Voltage Sea Level 300 VAC min PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT Electrical Travel Continuous LIBRARY Contact Bounce (15 RPM) 20 ms max ** RPM (Operating) 60 max** Product Dimensions Environmental Characteristics PEC11R-1xxxF-Nxxxx Operating Temperature Range 0.5 C: L 13.0 -30 C to +70 C (-22 F to +158 F) (.020) 12.5 5.5 (.512) LB Storage Temperature Range (.492) (.217) 2 +0.2/-0 4.5 +0/-.05 -40 C to +85 C (-40 F to +185 F) (.071 +.008/-0) (.177 +0/-.002) 2 PLCS. Humidity 7.0 13.4 MIL-STD-202, Method 103B, Condition B (.28) (.529) A C B Vibration 2.1 +0.2/-0 6.0 F (.083 +.008/-0) 10~55~10 Hz / 1 min / Amplitude 15 mm (.236) 2 PLCS. 5.0 0.75 A C B A CHANNEL Shock 100 G DIA. M7 x C COMMON (.197) 1.9 (.030) 0.8 1.0 +0.1/-0 IP Rating IP 44 B CHANNEL (.075) (.032) (.039 +.004/-0) MOUNTING SURFACE 2.1 3.5 DIA. 3 PLCS. 5.0 Mechanical Characteristics (.102) (.118) (.197) Mechanical Angle 360 Continuous 14.0 (.56) Torque Detent 30 to 90 gf-cm (041 to 125 oz -in) PEC11R-1xxxF-Sxxxx Running 10-70 gf-cm (014 to 097 oz -in) 13.0 Mounting 102 kgf-cm (8 83 lb-in) max 0.5 C: L (.512) (.020) 12.5 Shaft Side Load (Static) 6.5 2 +0.2/-0 LB (.492) 4.5 +0/-.05 204 kgf (4 5 lbs ) min (.256) (.071 +.008/-0) (.177 +0/-.002) 2 PLCS. Weight 5 gm (017 oz) max 7.0 Terminals Printed circuit board terminals 13.4 (.28) (.529) A C B Soldering Condition 2.1 +0.2/-0 6.0 (.083 +.008/-0) Wave Soldering Sn955/Ag28/Cu07 F (.236) 2 PLCS. 5.0 0.5 solder with no-clean flux: 260 C max for A C B A CHANNEL DIA. (.197) (.020) C COMMON 3 1 sec 1.9 0.8 1.0 +0.1/-0 SWITCH TRAVEL B CHANNEL (.075) Hand Soldering Not recommended (.032) (.039 +.004/-0) 0.75 M7 x DIA. 5 PLCS. 2.5 5.0 Hardware One flat washer and one mounting (.030) (.098) (.197) nut supplied with each encoder 14.0 MOUNTING 1.9 4.7 Rotational Life 30,000 cycles min (.551) SURFACE (.075) (.185) Switch Life 20,000 cycles min Switch Characteristics PEC11R-2xxxF-Nxxxx Switch Type 0.5 C: L Contact Push ON Momentary SPST (.020) 12.5 5.5 LB Power Rating (Resistive Load) 2 +0.2/-0 10.8 (.492) (.217) 4.5 +0/-.05 (.071 +.008/-0) (.425) 10 mA at 5 VDC (.177 +0/-.002) 2 PLCS. Switch Travel 05 03 mm 10 13.4 Switch Actuation Force (.394) (.529) A C B 610 306 gf (847 4 24 ozin) 2.1 +0.2/-0 6.0 F Contact Resistance 100 milliohms 5 VDC (.083 +.008/-0) (.236) 5.0 A C B A CHANNEL 0.75 2 PLCS. M7 x DIA. C COMMON (.197) 3.5 (.030) WARNING 1.0 +0.1/-0 B CHANNEL (.138) 0.8 MOUNTING SURFACE (.039 +.004/-0) Cancer and Reproductive Harm 1.9 (.032) DIA. 3 PLCS. www.P65Warnings.ca.gov (.075) 5.0 *RoHS Directive 2015/863, Mar 31, 2015 and Annex. 2.6 3.0 (.197) MM 10.2 DIMENSIONS: (.102) (.118) **Devices are tested using standard noise reduction (INCHES) (.402) filters. For optimum performance, designers should use noise reduction filters in their circuits. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as CAUTION set forth on the last page of this document, and at Do not store product in high temperature and humidity, direct sunlight and/or places where corrosive gases www.bourns.com/docs/legal/disclaimer.pdf. may be generated. Please use product within 6 months from the date of delivery and promptly after unpacking.Applications Level control, tuning and timer settings in: n Audio-visual equipment n Consumer electric appliances n Radios n Musical instrumentation n Communications equipment PEC11R Series - 12 mm Incremental Encoder Product Dimensions (continued) PEC11R-2xxxF-Sxxxx 0.5 C: L (.020) 12.5 6.5 2 +0.2/-0 10.8 LB (.492) 4.5 +0/-.05 (.256) (.071 +.008/-0) (.425) (.177 +0/-.002) 2 PLCS. 10 13.4 (.394) (.529) A C B 2.1 +0.2/-0 2.5 6.0 (.083 +.008/-0) F (.098) (.236) 2 PLCS. 0.5 A C B A CHANNEL DIA. (.020) 5.0 C COMMON 0.8 1.0 +0.1/-0 SWITCH TRAVEL B CHANNEL (.197) (.032) (.039 +.004/-0) 0.75 1.9 M7 x DIA. 5 PLCS. 5.0 (.030) (.075) (.197) 10.2 2.5 MOUNTING (.402) (.098) SURFACE MM 2.4 4.2 DIMENSIONS: (INCHES) (.094) (.165) PEC11R-4xxxF-Nxxxx MOUNTING SURFACE 0.5 L C: 12.5 (.020) 6.5 (.492) LB 4.5 +0/-.05 (.256) 13.2 (.177 +0/-.002) 2.6 +0.2/-0 7.5 (.520) (.101 +.008/-0) (.295) 13.4 2 PLCS. (.528) 2.5 1.8 +0.2/-0 6.0 (.098) F (.071 +.008/-0) (.236) 2 PLCS. 0.75 DIA. A C B A CHANNEL 7.5 3.7 M7 x 5.0 5.0 (.030) C COMMON (.295) (.146) 0.8 (.197) 1.0 +0.1/-0 (.197) B CHANNEL 3 PLCS. 5.0 (.031) (.039 +.004/-0) (.197) DIA. 3 PLCS. 14.0 (.551) PEC11R-4xxxF-Sxxxx MOUNTING SURFACE L 0.5 SWITCH 12.5 6.5 (.020) TRAVEL (.492) LB 13.2 (.256) 0.5 C: 5.0 (.520) 7.0 7.0 (.020) (.197) (.276) (.276) 1 2 4.5 +0/-.05 2.6 +0.2/-0 (.177 +0/-.002) (.101 +.008/-0) 13.4 2 PLCS. (.528) 2.5 1.8 +0.2/-0 6.0 F (.098) (.071 +.008/-0) (.236) 2 PLCS. 0.75 DIA. A C B A CHANNEL 7.5 7.5 3.7 M7 x 5.0 5.0 (.030) C COMMON (.295) (.295) (.146) 0.8 (.197) (.197) B CHANNEL 5 PLCS. 1.0 +0.1/-0 5.0 (.031) (.039 +.004/-0) (.197) 14.0 DIA. 5 PLCS. (.551) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.