PEC12R-4125F-S0012 Bourns

Features n Compact design, long life and high reliability n Momentary push switch option n Available in a wide variety of configurations to meet many user requirements PEC12R - 12 mm Incremental Encoder Electrical Characteristics Additional Information Output 2-bit quadrature code Click these links for more information: Contact Rating 10 mA 5 VDC Insulation Resistance 10 megohms 250 VDC Dielectric Withstanding Voltage Sea Level 50 VAC minimum Electrical Travel Continuous PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT Contact Bounce (15 RPM) 2 0 ms maximum** LIBRARY RPM (Operating) 100 maximum** Quadrature Output Table Environmental Characteristics Operating Temperature Range -30 C to +70 C (-22 F to +158 F) CW Storage Temperature Range -40 C to +85 C (-40 F to +185 F) Humidity MIL-STD-202, Method 103B, Condition B OFF Vibration 10~55~10 Hz / 1 min / Amplitude 1 5 mm ON A Signal Shock 100 G Rotational Life 30,000 cycles minimum B Signal Switch Life 20,000 cycles minimum IP Rating IP 40 D Moisture Sensitivity Level 1 ESD Classification (HBM) N/A CCW Mechanical Characteristics Mechanical Angle 360 continuous Torque Detent 30 to 90 gf-cm (0 41 to 1 25 oz-in) Running 10 to 70 gf-cm (0 14 to 0 97 oz-in) Mounting 10 2 kgf cm (8 83 lb -in ) maximum Shaft Side Load (Static) 2 04 kgf (4 5 lbs ) minimum Weight 3 gm (0 1 oz ) maximum Asia-Pacific: Terminals Printed circuit board terminals Tel: +886-2 2562-4117 Terminals Printed circuit board terminals Email: asiacus bourns com Soldering Condition Europe: Wave Soldering Sn95 5/Ag2 8/Cu0 7 solder with no-clean flux: 260 C max for 3 1 sec Tel: +36 88 885 877 Hand Soldering Not recommended Email: eurocus bourns com Hardware One flat washer and one mounting nut supplied with each encoder with bushing The Americas: Tel: +1-951 781-5500 Switch Characteristics Email: americus bourns com Switch Type Contact Push ON Momentary SPST Power Rating (Resistive Load) 10 mA at 5 V DC www.bourns.com Switch Travel 0 5 0 3 mm Switch Actuation Force 610 306 gf (8 47 4 24 oz -in ) Contact Resistance 100 milliohms 5 VDC WARNING How To Order Cancer and Reproductive Harm PEC12R - 4 0 20 F - S 0012 www.P65Warnings.ca.gov Model *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Terminal/Bushing Configuration **Devices are tested using standard noise reduction 2 = Vertical Mount - Radial PC Pin/No Bushing filters. For optimum performance, designers should use 3 = Horizontal Mount - Axial PC Pin/with Bushing noise reduction filters in their circuits. 4 = Horizontal Mount - Axial PC Pin/No Bushing Specifications are subject to change without notice. Users should verify actual device performance in their Detent Option specific applications. The products described herein and 0 = No Detents 1 = 12 Detents (available with 12 pulses only) 2 = 24 Detents this document are subject to specific legal disclaimers as Standard Shaft Length set forth on the last page of this document, and at 15 = 15 0 mm (Horizontal Mount/No Bushing only) 22 = 22 5 mm www.bourns.com/docs/legal/disclaimer.pdf. 17 = 17 5 mm 25 = 25 0 mm 20 = 20 0 mm 30 = 30 0 mm Shaft Style F = Insulated Flatted Shaft CAUTION Switch Configuration Do not store product in high temperature and humidity, S = Push Momentary Switch N = No Switch direct sunlight and/or places where corrosive gases may Resolution be generated. Please use product within 6 months from 0012 = 12 Pulses per 360 Rotation 0024 = 24 Pulses per 360 Rotation the date of delivery and promptly after unpacking.Applications Level control, tuning and timer settings in: n Audio-visual equipment n Consumer electric appliances n Musical instrumentation n Communications equipment PEC12R - 12 mm Incremental Encoder Product Dimensions PEC12R-2xxxF-Nxxxx (Vertical Mount - Radial PC Pin/No Bushing, No Switch) L 5.0 5.0 12.5 (.197) (.197) (.492) 0.5 C 7.0 (.020) DIA. 10.8 2.0 +0.2/-0 (.276) (.425) 2.5 10.0 (.079 +.008/-0) (.098) 2 PLCS. (.394) 13.4 (.528) A C B 2.1 +0.2/-0 F 3.5 (.083 +.008/-0) 1.0 +0.1/-0 5.0 (.138) 4.5 +0/-0.1 2 PLCS. (.039 +.004/-0) A A CHANNEL A C B (.197) (.177 +0/-.004) DIA. 3 PLCS. C COMMON 0.8 6.0 B CHANNEL B (.031) DIA. (.236) 0.8 (.032) MOUNTING 1.9 SURFACE 5.0 (.075) (.197) 2.5 10.2 (.098) 4.1 (.402) (.160) 2.4 (.094) PEC12R-2xxxF-Sxxxx (Vertical Mount - Radial PC Pin/No Bushing, Push Momentary Switch) L 12.5 6.0 5.0 (.492) (.236) (.197) 0.5 0.5 C 7.0 (.020) (.020) 2.0 +0.2/-0 DIA. 10.8 (.276) SWITCH 3.5 (.079 +.008/-0) (.425) TRAVEL 2.5 10.0 (.138) 2 PLCS. (.098) (.394) 13.4 1 2 (.528) A C B 2.1 +0.2/-0 (.083 +.008/-0) F 5 VDC 2 PLCS. 1.0 +0.1/-0 5.0 4.5 +0/-0.1 (.039 +.004/-0) A 10K OHMS A C B10K OHMSCHANNEL A (.197) (.177 +0/-.004) DIA. 5 PLCS. C COMMON 0.8 6.0 10K OHMS B CHANNEL 10K OHMSB (.031) DIA. (.236) TERMINAL A0.8 TERMINAL B 3.5 (.032) MOUNTING (.138) 0.01 F 0.01 F SURFACE 5.0 (.197) 1.9 3.5 ENCODER 10.2 (.138) (.075) 5.1 (.402) (.201) TERMINAL C 2.4 (.094) Switch Circuit Suggested Filter Circuit 17.5 20.0 22.5 25.0 30.0 L (.688) (.787) (.886) (.984) (1.181) 5 VDC 5.0 7.0 7.0 12.0 12.0 10K OHMS 10K OHMS F (.197) (.276) (.276) (.472) (.472) 12 10K OHMS 10K OHMS TERMINAL A TERMINAL B MM DIMENSIONS: 0.01 F 0.01 F (INCHES) CW ENCODER <10 0.3 = TOLERANCE: (<.400) (.012) OFF TERMINAL C ON 10 0.5 A Signal = (.400) (.020) B Signal D Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 12 CW OFF ON A Signal B Signal D