PER561-P115-N0015 Bourns

Features n Low profile incremental encoder n High-class rotational feel n Haptic detent feedback n RoHS compliant* PER56 - 56 mm Low Profile Incremental Ring Encoder Additional Information Product Dimensions Click these links for more information: 10.75 0.2 2.00 (.423 .008) 3.569 40 (.097) (.141) 6.20 2.00 3 PLCS. 2.0 120 1 (.244) (.079) 3 PLCS. DIA. PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT 2 PLCS. 22.00 LIBRARY 1.20 3.00 (.866) (.048) (.118) 14 11 Electrical Characteristics Output 2-bit quadrature code 30.00 (1.18) Contact Rating 10 mA 5 V DC 1.00 5.20 0.5 C Insulation Resistance (.039) (.205) (.020) 10.00 2 PLCS. 3 PLCS. 100 M 250 V DC 3.50 5.00 3.00 (.394) Dielectric Withstanding Voltage (.138) (.197) (.118) 40.60 Sea Level 300 V AC 2 PLCS. DIA. 5.50 (1.60) Electrical Travel Continuous (.217) 46.987 Contact Bounce (15 RPM) 2 ms max** DIA. 30 (1.85) 56.50 Environmental Characteristics 3.70 0.05 45.50 0.3 DIA. DIA. (2.22) (.146 .002) (1.79 .012) Operating Temperature -20 C to +70 C 3.10 +0.1/-0 Storage Temperature -40 C to +85 C 5.50 (.122 +.004/-0) MM IP Rating IP 40 (.217) DIMENSIONS: 10.36 (INCHES) Soldering Condition (.406) Wave Soldering 260 C for 5 s Manual Soldering 300 C for 3 s 0.35 0.80 3.75 (.014) (.031) Mechanical Characteristics (.150) 3 PLCS. RPM (operating) 60 max Mechanical Angle 360 continuous Recommended PCB Layout Detent Torque 50 to 200 gf-cm Rotational Life 50,000 cycles 4.00 DIA. 3 PLCS. 120 (.157) Quadrature Output Table 3 PLCS. 3.20 DIA. 2 PLCS. D 40 (.126) OFF 1 2.20 (0.87) ON DIA. 4 PLCS. 48.0 60.0 OFF (1.89) 14 (2.36) 11 46.987 DIA. ON DIA. 58.0 (1.85) (2.28) 30.00 2-6 DIA. DIA. CW (1.18) Suggested Filter Circuit 5.00 1.00 +0.1/-0 (.197) 5 VDC (0.39 +.004/-0) MM DIA. 3 PLCS. DIMENSIONS: 10K OHMS 10K OHMS (INCHES) 10K OHMS 10K OHMS TERMINAL A TERMINAL B 0.01 F 0.01 F ENCODER TERMINAL C WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. CAUTION Do not store product in high temperature ** Devices are tested using standard noise reduction filters. For optimum performance, designers should use noise reduction filters in their circuits. and humidity, direct sunlight and/or places Specifications are subject to change without notice. Users should verify actual device performance in their specific where corrosive gases may be generated. Please use 12 applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the product within 6 months from the date of delivery and last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. promptly after unpacking. CW OFF ON A Signal B Signal DPER56 - 56 mm Low Profile Incremental Ring Encoder How To Order PER56 1 - P1 15 - N 0015 Model Number of Units 1 = Single Orientation P = PC Pins Down Facing Detent Option 1 = 30 Detents (15 Pulses) Ring Height 15 = 15 mm Switch Configuration N = No Switch Resolution 0015 = 15 Pulses per 360 Rotation Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus bourns com EMEA: Tel: +36 88 885 877 Email: eurocus bourns com The Americas: Tel: +1-951 781-5500 Email: americus bourns com www.bourns.com REV. 07/21 Specifi cations are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last paeg of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.