PM610-02-RC Bourns

Features Applications Formerly model Inductors: Buck-boost, coupled, ltering, common mode Six windings - multiple con gurations Transformers: Flyback, push-pull, inverter, Compact size gate drive, isolation Tape and reel packaging RoHS compliant* PM600/PM610/PM620 Series - SMD Inductor/Transformer Electrical Speci cations General Speci cations Rated Current ....... Ind. drop of 30 % typ. <1> ET (VmS) <1> ET (VmS) ...................................................at Isat Inductance DCR Based on Based on Temperature Rise ... 40 C typical at Irms 100 KHz Bourns ( ) Isat Irms 40 C Rise Core Operating Temperature Part No. ( H) Tol. (%) Max. (A) (A) (260 KHz) Saturation ................................-40 C to +105 C PM600-01-RC 201.6 30 0.324 0.02 0.46 16.8 103.2 Storage Temperature PM600-02-RC 89.6 30 0.137 0.03 0.71 11.2 68.8 ................................-40 C to +105 C PM600-03-RC 27.4 10 0.324 0.31 0.46 16.8 103.2 Soldering .......... 245 C, 5 seconds max. PM600-04-RC 12.2 10 0.137 0.47 0.71 11.2 68.8 Dielectric Strength ...................500 Vrms PM600-05-RC 14.7 10 0.324 0.58 0.46 16.8 103.2 between windings PM600-06-RC 6.5 10 0.137 0.87 0.71 11.2 68.8 Materials PM600-07-RC 10.9 10 0.324 0.88 0.46 16.8 103.2 PM600-08-RC 4.9 10 0.137 1.32 0.71 11.2 68.8 Core .............................................. Ferrite PM600-09-RC 8.5 10 0.324 1.23 0.46 16.8 103.2 Wire ........... Polyurethane-coated copper PM600-10-RC 3.8 10 0.137 1.85 0.71 11.2 68.8 Terminal Coating............. Sn-Ag-Cu alloy PM610-01-RC 160.0 30 0.202 0.04 0.68 21.0 130 Packaging PM610-02-RC 78.4 30 0.094 0.06 1.00 14.7 91 PM600 ..........600 pcs. per 13-inch reel PM610-03-RC 21.6 10 0.202 0.67 0.68 21.0 130 PM610 ..........300 pcs. per 13-inch reel PM610-04-RC 10.6 10 0.094 0.96 1.00 14.7 91 PM620 ..........200 pcs. per 13-inch reel PM610-05-RC 11.6 10 0.202 1.30 0.68 21.0 130 PM610-06-RC 5.7 10 0.094 1.86 1.00 14.7 91 PM610-07-RC 8.3 10 0.202 2.00 0.68 21.0 130 PM610-08-RC 4.1 10 0.094 2.86 1.00 14.7 91 PM610-09-RC 6.6 10 0.202 2.30 0.68 21.0 130 PM610-10-RC 3.2 10 0.094 3.29 1.00 14.7 91 PM620-01-RC 160.6 30 0.094 0.03 1.28 20.8 130 PM620-02-RC 77.0 30 0.065 0.04 1.54 14.4 90 PM620-03-RC 131.8 20 0.094 0.08 1.28 20.8 130 PM620-04-RC 63.2 20 0.065 0.12 1.54 14.4 90 PM620-05-RC 23.3 10 0.094 0.36 1.28 20.8 130 PM620-06-RC 11.2 10 0.065 0.52 1.54 14.4 90 PM620-07-RC 14.2 10 0.094 0.76 1.28 20.8 130 PM620-08-RC 6.8 10 0.065 1.10 1.54 14.4 90 PM620-09-RC 9.3 10 0.094 1.11 1.28 20.8 130 PM620-10-RC 4.5 10 0.065 1.60 1.54 14.4 90 PM620-11-RC 7.9 10 0.094 1.40 1.28 20.8 130 PM620-12-RC 3.8 10 0.065 2.02 1.54 14.4 90 <1> Single or multi-windings in parallel. ET of multiple winding in series is number of windings times value of ET. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specications are subject to change without notice. Users should verify actual device performance in their WARNING Cancer and Reproductive Harm specific applications. The products described herein and this document are subject to specic legal disclaimers last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. www.P65Warnings.ca.gov as set forth on the *RoHS COMPLIANT PM600/PM610/PM620 Series - SMD Inductor/Transformer Typical Con gurations Inductor: Figure 4 Basic Diagram Figure 1 Figure 2 Figure 3 Inductance: L Inductance: 36 x L Inductance: 25 x L Inductance: 16 x L Inductance: 9 x L Current: I Current: I Current: I Current: I Current: 2 x I Figure 5 Figure 6 Inductance: 4 x L Inductance: L Current: 3 x I Current: 6 x I Transformer: Basic Diagram Figure 1 Figure 2 Figure 3 Figure 4 Turns Ratio: Turns Ratio: Turns Ratio: Turns Ratio: Turns Ratio: 1:1:1:1:1:1 1:1 1:1:1 1:5 or 5:1 1:4 or 4:1 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Turns Ratio: Turns Ratio: Turns Ratio: Turns Ratio: Turns Ratio: 1:3 or 3:1 1:2 or 2:1 4:1:1 3:1:1:1 2:3 or 3:2 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.