Features Applications
Formerly model Inductors: Buck-boost, coupled, ltering,
common mode
Six windings - multiple con gurations
Transformers: Flyback, push-pull, inverter,
Compact size
gate drive, isolation
Tape and reel packaging
RoHS compliant*
PM600/PM610/PM620 Series - SMD Inductor/Transformer
Electrical Speci cations General Speci cations
Rated Current ....... Ind. drop of 30 % typ.
<1> ET (VmS) <1> ET (VmS) ...................................................at Isat
Inductance
DCR Based on Based on
Temperature Rise ... 40 C typical at Irms
100 KHz
Bourns () Isat Irms 40 C Rise Core
Operating Temperature
Part No. (H) Tol. (%) Max. (A) (A) (260 KHz) Saturation
................................-40 C to +105 C
PM600-01-RC 201.6 30 0.324 0.02 0.46 16.8 103.2
Storage Temperature
PM600-02-RC 89.6 30 0.137 0.03 0.71 11.2 68.8
................................-40 C to +105 C
PM600-03-RC 27.4 10 0.324 0.31 0.46 16.8 103.2
Soldering .......... 245 C, 5 seconds max.
PM600-04-RC 12.2 10 0.137 0.47 0.71 11.2 68.8
Dielectric Strength ................... 500 Vrms
PM600-05-RC 14.7 10 0.324 0.58 0.46 16.8 103.2
between windings
PM600-06-RC 6.5 10 0.137 0.87 0.71 11.2 68.8
Materials
PM600-07-RC 10.9 10 0.324 0.88 0.46 16.8 103.2
PM600-08-RC 4.9 10 0.137 1.32 0.71 11.2 68.8
Core .............................................. Ferrite
PM600-09-RC 8.5 10 0.324 1.23 0.46 16.8 103.2
Wire ........... Polyurethane-coated copper
PM600-10-RC 3.8 10 0.137 1.85 0.71 11.2 68.8
Terminal Coating............. Sn-Ag-Cu alloy
PM610-01-RC 160.0 30 0.202 0.04 0.68 21.0 130
Packaging
PM610-02-RC 78.4 30 0.094 0.06 1.00 14.7 91
PM600 ..........600 pcs. per 13-inch reel
PM610-03-RC 21.6 10 0.202 0.67 0.68 21.0 130
PM610 ..........300 pcs. per 13-inch reel
PM610-04-RC 10.6 10 0.094 0.96 1.00 14.7 91
PM620 ..........200 pcs. per 13-inch reel
PM610-05-RC 11.6 10 0.202 1.30 0.68 21.0 130
PM610-06-RC 5.7 10 0.094 1.86 1.00 14.7 91
PM610-07-RC 8.3 10 0.202 2.00 0.68 21.0 130
PM610-08-RC 4.1 10 0.094 2.86 1.00 14.7 91
PM610-09-RC 6.6 10 0.202 2.30 0.68 21.0 130
PM610-10-RC 3.2 10 0.094 3.29 1.00 14.7 91
PM620-01-RC 160.6 30 0.094 0.03 1.28 20.8 130
PM620-02-RC 77.0 30 0.065 0.04 1.54 14.4 90
PM620-03-RC 131.8 20 0.094 0.08 1.28 20.8 130
PM620-04-RC 63.2 20 0.065 0.12 1.54 14.4 90
PM620-05-RC 23.3 10 0.094 0.36 1.28 20.8 130
PM620-06-RC 11.2 10 0.065 0.52 1.54 14.4 90
PM620-07-RC 14.2 10 0.094 0.76 1.28 20.8 130
PM620-08-RC 6.8 10 0.065 1.10 1.54 14.4 90
PM620-09-RC 9.3 10 0.094 1.11 1.28 20.8 130
PM620-10-RC 4.5 10 0.065 1.60 1.54 14.4 90
PM620-11-RC 7.9 10 0.094 1.40 1.28 20.8 130
PM620-12-RC 3.8 10 0.065 2.02 1.54 14.4 90
<1> Single or multi-windings in parallel. ET of multiple winding in series is number of
windings times value of ET.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Speci cations are subject to change without notice.
Customers should verify actual device performance in their speci c applications.
*RoHS COMPLIANT
PM600/PM610/PM620 Series - SMD Inductor/Transformer
Typical Con gurations
Inductor:
Figure 4
Basic Diagram Figure 1 Figure 2 Figure 3
Inductance: L Inductance: 36 x L Inductance: 25 x L Inductance: 16 x L Inductance: 9 x L
Current: I Current: I Current: I Current: I Current: 2 x I
Figure 5 Figure 6
Inductance: 4 x L Inductance: L
Current: 3 x I Current: 6 x I
Transformer:
Basic Diagram Figure 1 Figure 2 Figure 3 Figure 4
Turns Ratio: Turns Ratio: Turns Ratio: Turns Ratio: Turns Ratio:
1:1:1:1:1:1 1:1 1:1:1 1:5 or 5:1 1:4 or 4:1
Figure 5 Figure 6 Figure 7 Figure 8 Figure 9
Turns Ratio: Turns Ratio: Turns Ratio: Turns Ratio: Turns Ratio:
1:3 or 3:1 1:2 or 2:1 4:1:1 3:1:1:1 2:3 or 3:2
Speci cations are subject to change without notice.
Customers should verify actual device performance in their speci c applications.