Features Carbon element Assortment of resistance tapers 45 mm and 60 mm travel lengths Single and dual gang elements Long operational life Tracking error within 2 dB Various lever styles PTE Series Low Pro le Slide Potentiometer Product Dimensions Electrical Characteristics Standard Resistance Range 45 mm Length of Travel ....................... 1K ohms to 1 megohm Lever End Style B Standard Resistance Tolerance ... 20 % 72.0 0.5 (2.835 0.020) End Resistance ................. 2 ohms max. Lever Insulation Resistance 100 VDC 65.0 0.3 Length (2.559 0.012) .............................100 megohms min. 15.0 57.0 Dielectric Withstanding Voltage 2.8 (2.244) (.591) ..............................................250 VAC (0.110) Tracking Error ............................... 2 dB 20.0 Standard Taper ..................Linear, Audio (.787) 16.0 0.5 (0.630 0.020) Power Rating Linear .....................................0.2 watt MM Audio ......................................0.1 watt DIMENSIONS: M3 2 PLCS. (INCHES) Slider Noise .......................100 mV max. 45.0 0.5 (1.772 0.020) 3.0 0.2 TRAVEL Environmental Characteristics (0.118 0.008) 4.0 +0.2/-0 Operational Life ..............100,000 cycles 10.0 8.5 0.2 (0.157 +0.008/-0) 1.2 0.05 TR Shift .................................... 15 % (0.394) (0.335 0.008) 5.0 (0.047 0.002) (0.197) Operating Temperature Range 3.8 .................................-10 C to +55 C 8.0 (0.150) (0.315) Resistance to Solder Heat ............. 5 % L 0.5 1.0 0.5 (L 0.020) 3.0 Mechanical Characteristics (0.039) (0.020) (0.118) Mechanical Angle ...................300 5 Mechanical Travel ........ Length 0.5 mm Operating Force .............................50 gf 4.9 3.8 10.0 0.5 2.1 (.193) (0.150) Stop Strength .........................5 kgf min. 0.5 (0.394 0.020) (0.083) (0.020) 18.0 18.0 4.1 Shaft Axial Force ....................5 kgf min. 1.0 (.709) (.709) (0.161) (0.039) Shaft Wobble .. 2(2 x L/25) mm p-p max. MOUNTING Soldering Condition SURFACE Mounting Hole Detail Manual ...........300 C 5 C for 3 sec. 3.75 0.1 Wave ..............260 C 5 C for 5 sec. (0.148 0.004) 72.5 0.1 Wash .....................Not recommended (2.854 0.004) 11.25 0.1 (0.443 0.004) 2 Standard Resistance Table 1 3 1 3 Resistance Resistance 2 (Ohms) Code 1.5 +0.2/-0 1,000 102 (0.059 +0.008/-0) 2,000 202 DIA. 6 PLCS. 5,000 502 10,000 103 20,000 203 Schematics 50,000 503 100,000 104 Dual Gang Single Gang 200,000 204 500,000 504 1,000,000 105 2 2 R1 1 3 R1 1 3 R2 1 3 2 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. *RoHS COMPLIANT(10C) C2 (30C) C6 (25C) C5 (20C) C4 (15C) C3 (05C) C1 Applications Mixing consoles Drum machines Keyboards and synthesizers Equalizers PTE Series Low Pro le Slide Potentiometer Product Dimensions Tapers 60 mm Length of Travel A Series Tapers 100 Lever End Style A 87.0 0.5 90 (3.425 0.020) Lever 80 80.0 0.3 Length 70 (3.150 0.012) 15.0 72.0 60 2.8 (.591) (2.835) (0.110) 50 20.0 40 (.787) 16.0 0.5 30 (0.630 0.020) 20 MM DIMENSIONS: 0.5 (INCHES) 10 M3 2 PLCS. (0.020) 010 20 30 40 50 60 70 80 90 100 60.0 0.5 Terminal 1 Rotational Travel (%) Terminal 3 (2.362 0.020) 4.0 +0/-0.1 TRAVEL (0.157 +0/-0.004) 1.2 0.05 0.5 R 5.0 0.2 (0.047 0.002) (0.020) B Series Tapers (0.197 0.008) 100 8.0 90 (0.315) L 0.5 10.0 0.1 (L 0.020) 80 0.3 R (0.394 0.004) (0.012) 70 60 3.8 3.8 50 10.0 0.5 (0.150) (0.150) 2.1 0.5 4.1 (0.394 0.020) 40 30.0 20.0 (0.083) (0.020) (0.161) (1.181) (0.787) 1.0 30 MOUNTING (0.039) SURFACE 3.75 0.1 20 (0.148 0.004) 87.5 0.1 10 (3.444 0.004) 11.25 0.1 (0.443 0.004) 2 010 20 30 40 50 60 70 80 90 100 1 3 Terminal 1 Rotational Travel (%) Terminal 3 1 3 2 1.5 +0.2/-0 (0.059 +0.008/-0) C Series Tapers DIA. 6 PLCS. 100 90 80 70 60 50 40 30 20 10 010 20 30 40 50 60 70 80 90 100 Terminal 1 Rotational Travel (%) Terminal 3 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. (10A) A2 (15A) A3 (05A) A1 (5B) B5 (20A) A4 (25A) A5 (30A) A6 (1B) B1 (2B) B2 (4B) B4 (3B) B3 Output Voltage across Terminals 1-2 Output Voltage across Terminals 1-2 X 100 (%) X 100 (%) Output Voltage across Terminals 1-2 Input Voltage across Terminals 1-3 Input Voltage across Terminals 1-3 X 100 (%) Input Voltage across Terminals 1-3