Features Carbon element Assortment of resistance tapers Push latching shaft Flatted, knurled and slotted shaft styles Center detent option PTP90 Series Panel Control w/Push Latching Shaft Product Dimensions Electrical Characteristics Standard Resistance Range (Shown with Knurled Shaft) ........................1K ohms to 1 megohm 23.25 30.0 0.8 PUSH TRAVEL Standard Resistance Tolerance (0.915) (1.181 0.031) 9.0 0.5 R < 250K ohms .........................20 % (0.354 0.020) R 250K ohms .........................30 % PUSH LATCH TRAVEL 8.0 End Resistance (0.315) R < 50K ohms .............. 30 ohms max. 6.0 9.5 R 50K ohms ......... 0.1 % of TR max. (0.236) (0.374) 10.0 Insulation Resistance 250 VDC 0.5 (0.394) 4.85 Y SHAFT SLOT ............................. 100 megohms min. (0.020) (0.191) IS OPTIONAL Dielectric Withstanding Voltage ANGLE XX ..............................................300 VAC Tracking Error (-40 dB to 0 dB) .....3 dB C1 6.5 0.5 Standard Taper .................. Linear, Audio 7.0 (0.256 0.002) 12 3 Power Rating (0.276) Y R2 R1 0.75 Linear ...................................0.05 watt M7 x 10.7 0.030 (0.421) Audio ..................................0.025 watt 0.8 0.2 1.0 0.1 0.9 0.1 3.5 Slider Noise .......................100 mV max. (0.031 0.002) (0.039 0.004) (0.035 0.004) (0.138) Operating Voltage ....... 50 VAC / 10 VDC 6.0 (0.236) DIA. Environmental Characteristics Operational Life ................15,000 cycles Mounting Hole Detail Locating Lug Detail TR Shift .....................................15 % Operating Temperature Range 2.5 Y ..................................-10 C to +55 C (0.098) 6.0 0.2 Resistance to Solder Heat ..............5 % (0.236 0.008) 5.0 XX IP Rating .........................................IP 40 (0.197) Moisture Sensitivity Level .....................1 MOUNTING SURFACE ESD Classification (HBM)................. N/A 0.8 0.2 DIA. (0.315 0.008) 1.0 +0.1/-0 5.0 Y Mechanical Characteristics (0.039 +0.004/-0) (0.197) 2.0 0.1 6 PLCS. (0.079 0.004) Mechanical Angle ..................310 max. Operating Torque ..............20~250 gf-cm Stop Strength................... 4 kgf-cm max. Hardware Standard Resistance Table Mounting Torque ............ 10 kgf-cm max. Shaft Push Latch Force ..........40~500 gf DIA. Resistance Resistance 12.0 Push Latch Operating Life (Ohms) Code (.472) DIA.....................................10,000 cycles 1,000 102 7.2 2,000 202 Soldering Condition 0.75 (.283) M7 x 5,000 502 (.030) Manual ........... 300 C 5 C for 3 sec. 10,000 103 Wave .............. 260 C 5 C for 5 sec. 20,000 203 DIA. Wash .....................Not recommended 12.7 50,000 503 (.500) 100,000 104 Hardware ................One flat washer and 200,000 204 one mounting nut supplied with 500,000 504 2.0 0.5 11.0 each potentiometer 1,000,000 105 (.433) (.079) (.020) DIA. NUT WASHER MM DIMENSIONS: (INCHES) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specications are subject to change without notice. Users should verify actual device performance in their specic WARNING Cancer and Reproductive Harm applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the www.P65Warnings.ca.gov last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS COMPLIANT(10C) C2 (30C) C6 (25C) C5 (20C) C4 (15C) C3 (05C) C1 Applications Multimedia sound systems Mixers / drum machines / DJ equipment Portable electronics Portable appliances PTP90 Series Panel Control w/Push Latching Shaft Additional Shaft Styles Tapers Flatted Shaft A Series Tapers 100 30.0 (1.181) 90 10.7 (0.428) 80 8.3 70 10.0 (0.327) DIA. (0.394) 8.0 4.5 +0/-0.1 60 60 10 /-5 (0.315) (0.177 +0.004) PUSH LATCH 6.0 +0/-0.05 50 TRAVEL (0.236 +0.002) 40 DIA. 30 4.5 C1 9.0 0.5 20 (0.177) (0.354 0.020) SHAFT SHOWN IN 0.75 PUSH TRAVEL 10 M7 X FULL CCW POSITION (0.030) 010 20 30 40 50 60 70 80 90 100 Terminal 1 Rotational Travel (%) Terminal 3 Slotted Shaft 30.0 B Series Tapers PUSH LATCH 100 (1.181) 10.7 TRAVEL (0.428) 8.0 90 (0.315) 1.6 0.2 80 (0.063 0.008) 10.0 60 10 /-5 1.0 (0.394) 70 (0.039) 6.0 60 (0.236) DIA. 50 40 9.0 0.5 C1 SHAFT SHOWN IN (0.354 0.020) FULL CCW POSITION 30 0.75 PUSH TRAVEL M7 X (0.030) 20 MM DIMENSIONS: 10 (INCHES) 010 20 30 40 50 60 70 80 90 100 Terminal 1 Rotational Travel (%) Terminal 3 How To Order Schematics PTP90 2 - 0 30 K - 103 B2 Single Gang C Series Tapers Model Number 100 2 Designator PTP90 = Panel Control 90 w/Push Latching Shaft 1 3 R1 80 Number of Sections 1 = Single Gang 70 2 = Dual Gang 60 Center Detent Dual Gang 0 = No Detent 50 1 = Center Detent 2 40 Shaft Length (FMS) 30 = 30 mm R1 1 3 30 Shaft Style R2 1 3 F = Flatted Metal 20 K = Knurled (18 tooth serrated) S = Slotted Metal 10 2 Resistance Code 010 20 30 40 50 60 70 80 90 100 (See Standard Resistance Table) Terminal 1 Rotational Travel (%) Terminal 3 Resistance Taper (See Taper Charts) Taper Series followed by Curve Number REV. 06/21 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. (10A) A2 (15A) A3 (05A) A1 (5B) B5 (20A) A4 (25A) A5 (30A) A6 (1B) B1 (2B) B2 (4B) B4 (3B) B3 Output Voltage across Terminals 1-2 Output Voltage across Terminals 1-2 Output Voltage across Terminals 1-2 X 100 (%) X 100 (%) X 100 (%) Input Voltage across Terminals 1-3 Input Voltage across Terminals 1-3 Input Voltage across Terminals 1-3