SDR1806-100ML Bourns

Features Applications Available in E6 series Input/output of DC/DC converters Low profile of only 6.6 mm Power supplies for: Portable communications equipment Inductance as low as 1 H Camcorders RoHS compliant* LCD TVs SDR1806 Series - SMD Power Inductors Inductance Test Voltage ...................................0.1 V Test SRF RDC I rms I sat 100 kHz Reflow Soldering ... 230 C, 10 sec. max Bourns Q Frequency Typ. Max. Max. Typ. (In compliance with JEDEC, Part Number (H) Tol. % Ref. (MHz) (MHz) (m) (A) (A) J-STD-020C, Table 4-2) SDR1806-1R0ML 1 20 21 7.96 100.0 4.0 10.0 30.00 Operating Temperature SDR1806-2R2ML 2.2 20 22 7.96 55.0 6.8 9.00 22.00 ...................................-40 C to +125 C SDR1806-3R3ML 3.3 20 22 7.96 40.0 9.8 7.60 17.00 (Temperature rise included) SDR1806-5R6ML 5.6 20 23 7.96 30.0 15.0 6.40 12.80 Storage Temperature ..-40 C to +125 C Resistance to Soldering Heat SDR1806-8R2ML 8.2 20 22 7.96 27.0 20.0 7.00 9.40 ......................... 260 C, 10 sec. max. SDR1806-100ML 10.0 20 22 2.52 25.0 25.0 5.30 10.00 Moisture Sensitivity Level ..................... 1 SDR1806-150ML 15.0 20 20 2.52 17.0 35.0 4.30 8.00 ..................N/A SDR1806-220ML 22.0 20 22 2.52 13.0 45.0 3.60 6.70 SDR1806-330ML 33.0 20 24 2.52 11.0 68.0 3.00 5.40 Materials SDR1806-470ML 47.0 20 22 2.52 9.0 95.0 2.50 4.60 Core .......................................Ferrite DR SDR1806-680ML 68.0 20 22 2.52 8.0 130.0 2.10 3.80 Wire ..........................Enamelled copper SDR1806-101KL 100.0 10 25 0.796 7.0 190.0 1.70 3.20 Base ..................................... LCP E4008 SDR1806-151KL 150.0 10 23 0.796 5.0 270.0 1.40 2.60 Terminal ........................................ Cu/Sn SDR1806-221KL 220.0 10 20 0.796 4.5 420.0 1.10 2.20 Rated Current .................Ind. drop 10 % typ. at Isat SDR1806-331KL 330.0 10 18 0.796 3.5 580.0 1.00 1.80 Temperature Rise SDR1806-471KL 470.0 10 15 0.796 3.0 820.0 0.80 1.50 ....................40 C max. at rated Irms SDR1806-681KL 680.0 10 12 0.796 2.5 1200.0 0.70 1.20 Packaging ....................250 pcs. per reel SDR1806-102KL 1000.0 10 10 0.252 2.0 1800.0 0.50 1.00 Product Dimensions Electrical Schematic 14.0 0.3 (.551 .012) 18.3 0.3 6.6 0.3 (.720 .012) (.260 .012) 13.0 0.3 (.512 .012) 2.5 0.2 (.098 .008) 2.6 0.2 (.102 .008) EMEA: The Americas: Recommended Layout www.bourns.com 2.9 12.7 REF. REF. (.114) (.500) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov 3.0 REF. (.118) * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specications are subject to change without notice. Users should verify actual device performance in their specic MM DIMENSIONS: applications. The products described herein and this document are subject to specic legal disclaimers as set forth on (INCHES) the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf *RoHS COMPLIANT 101101 101 101 101 SRF0504 Series - Line Filter SDR1806 Series - SMD Power Inductors Soldering Profile 300 <1> Max. of 10 seconds at 250 C <2> Max. of 30 seconds > 220 C 250 C 250 <1> <2> 200 150 120 - 150 seconds 100 Ramp-down 5 C/second maximum 50 Ramp-up 4 /second maximum 0 0 50 100 150 200 250 300 Time (seconds) 2.0 0.5 (.079 .020) 330 38.4 (12.99) (1.512) DIA. THICKNESS 0.10 13.0 0.5 (.004) 21.0 0.8 (.512 .020) MAX. (.827 .031) DIA. EMBOSSED CAVITY 50.0 (1.969) 13.0 0.5 DIA. (.512 .020) EMBOSSED CARRIER 32.0 34 (1.260) (1.339) 4.0 (.157) END START 32.0 (1.260) 20.0 (.787) NO COMPONENT NO COMPONENT 160 390 COMPONENTS (6.299) (15.354) USER DIRECTION OF FEED QTY: 250 PCS. PER REEL MM DIMENSIONS: (INCHES) REV. 03/18 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Temperature (C)