SDR2207-330YL Bourns

Features Applications Available in E12 series Input/output of DC/DC converters Low height of only 7.0 mm Power supplies for: Portable communications equipment Inductance as low as 0.78 H Camcorders High current up to 16 amps LCD TVs RoHS compliant* SDR2207 Series - SMD Power Inductors Inductance Test Voltage ...................................0.1 V Test SRF RDC I rms I sat 100 kHz Reflow Soldering ... 230 C, 10 sec. max Bourns Q Frequency Min. Max. Max. Typ. (In compliance with JEDEC, Part Number (H) Tol. % Ref. (MHz) (MHz) (m) (A) (A) J-STD-020C, Table 4-2) SDR2207-R78ML 0.78 20 30 5 104.0 2.6 15.0 30.0 Operating Temperature SDR2207-R80ML 0.8 20 30 5 102.0 2.8 16.0 35.0 ...................................-40 C to +125 C SDR2207-1R2ML 1.2 20 30 3 70.0 3.8 15.0 30.0 (Temperature rise included) SDR2207-1R5ML 1.5 20 30 3 60.0 5.0 15.0 25.0 Storage Temperature ..-40 C to +125 C Resistance to Soldering Heat SDR2207-1R8ML 1.8 20 31 3 51.0 4.5 13.0 25.0 ......................... 250 C, 10 sec. max. SDR2207-2R2ML 2.2 20 35 3 51.0 7.5 13.0 20.0 Moisture Sensitivity Level ..................... 1 SDR2207-2R7ML 2.7 20 38 3 51.0 7.0 10.0 20.0 ..................N/A SDR2207-3R3ML 3.3 20 38 3 39.0 7.8 9.0 17.0 SDR2207-3R9ML 3.9 20 38 3 36.0 12.0 9.0 15.0 Materials SDR2207-4R7ML 4.7 20 38 3 33.0 8.8 8.5 15.0 Core .......................................Ferrite DR SDR2207-5R6ML 5.6 20 50 3 30.0 13.4 7.8 14.0 Wire ..........................Enamelled copper SDR2207-6R0ML 6.0 20 43 3 28.0 17.0 7.5 12.0 Base .............................. Phenolic T375J SDR2207-6R8ML 6.8 20 38 3 27.0 14.2 7.5 12.0 Terminal ...................................Cu/Ag/Sn SDR2207-7R8ML 7.8 20 36 3 26.0 20.0 7.5 11.0 Rated Current .................Ind. drop 10 % typ. at Isat SDR2207-8R2ML 8.2 20 35 3 25.0 15.5 7.0 11.0 Temperature Rise SDR2207-100ML 10 20 53 5 20.0 17.2 6.5 10.0 ....................40 C max. at rated Irms SDR2207-120YL 12 15 50 5 19.0 23.6 5.5 9.5 Packaging ....................250 pcs. per reel SDR2207-150YL 15 15 38 5 16.0 28.8 5.0 9.0 SDR2207-180YL 18 15 46 5 15.0 33.0 4.6 8.0 Product Dimensions SDR2207-220YL 22 15 27 3 14.0 39.4 4.0 6.5 22.0 0.3 SDR2207-270YL 27 15 22 3 12.0 43.5 3.8 6.0 (.866 .012) SDR2207-330YL 33 15 27 3 11.0 58.4 3.4 5.5 SDR2207-390KL 39 10 18 3 10.0 65.0 3.2 5.2 SDR2207-470KL 47 10 27 3 9.0 91.2 2.8 5.0 SDR2207-560KL 56 10 25 2 8.3 96.5 2.6 4.5 SDR2207-680KL 68 10 18 2 7.9 112.0 2.4 4.0 SDR2207-820KL 82 10 28 2 6.5 144.0 2.3 3.5 SDR2207-101KL 100 10 18 2 6.2 168.0 2.2 3.0 SDR2207-121KL 120 10 20 2 6.0 230.0 1.6 3.0 SDR2207-151KL 150 10 22 2 5.8 250.0 1.5 2.6 SDR2207-181KL 180 10 20 2 5.7 300.0 1.3 2.5 7.0 + 0.8/-0.4 DIMENSIONS: SDR2207-221KL 220 10 19 2 5.5 380.0 1.2 2.4 (.276 + .031/-.016) MM SDR2207-271KL 270 10 17 2 5.3 470.0 1.1 2.2 (INCHES) SDR2207-331KL 330 10 20 1 5.1 560.0 1.0 1.9 SDR2207-391KL 390 10 17 1 4.9 680.0 0.9 1.7 SDR2207-471KL 470 10 19 1 4.7 850.0 0.8 1.4 SDR2207-561KL 560 10 18 1 4.5 1000 0.8 1.3 SDR2207-681KL 680 10 16 1 4.2 1100 0.7 1.2 = START OF WINDING SDR2207-821KL 820 10 16 1 3.9 1400 0.6 1.1 15.0 0.3 (.591 .012) SDR2207-102KL 1000 10 15 1 3.5 1800 0.6 1.0 Recommended Layout Electrical Schematic 13.5 (.531) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specications are subject to change without notice. Users should verify actual device performance in their specic 4.0 9.0 applications. The products described herein and this document are subject to specic legal disclaimers as set forth on (.157) (.354) the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf *RoHS COMPLIANT SRF0504 Series - Line Filter SDR2207 Series - SMD Power Inductors Soldering Profile 300 <1> Max. of 10 seconds at 250 C <2> Max. of 30 seconds > 220 C 250 C 250 <1> <2> 200 150 120 - 150 seconds 100 Ramp-down 5 C/second maximum 50 Ramp-up 4 /second maximum 0 0 50 100 150 200 250 300 Time (seconds) 2.0 0.5 330 (.079 .020) 38.4 (12.99) (1.51) DIA. THICKNESS 0.10 13.0 0.5 (.004) 21.0 0.8 (.512 .020) MAX. (.827 .031) DIA. EMBOSSED CAVITY 50.0 (1.969) 13.0 0.5 DIA. (.512 .020) EMBOSSED CARRIER 34.0 (1.34) 8.45 0.1 (.333 .004) 1.55 0.05 4.0 0.1 2.0 0.5 0.05 MIN. (.061 .002) (.157 .004) (.079) (.020 .002) 22.4 0.1 (.882 .004) 32.0 0.3 (1.26 .012) 9.0 0.1 (.354 .004) MM 15.5 0.1 20.0 0.1 DIMENSIONS: (INCHES) (.610 .004) (.787 .004) QTY: 250 PCS. PER REEL REV. 03/18 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Temperature (C)