SF-0603S200M-2 Bourns

E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250 % rated current) n UL 248-14 listed n Surface mount packaging for automated assembly n Multilayer SMD design n RoHS compliant* and halogen free** SF-0603SxxxM Series - Slow Blow Multilayer Surface Mount Fuses Electrical Characteristics Rated Current Resistance Rated Interrupting Typical Model Fusing Time 2 2 (Amps) () Typ.*** Voltage Rating I t (A s) **** SF-0603S050M-2 0.50 0.485 0.003 SF-0603S075M-2 0.75 0.254 0.006 DC 63 V DC 63 V 35 A SF-0603S100M-2 1.00 0.147 0.013 SF-0603S150M-2 1.50 0.059 0.030 SF-0603S200M-2 2.00 0.044 0.060 Open within 5 SF-0603S250M-2 2.50 0.032 0.100 sec. at 250 % SF-0603S300M-2 3.00 0.025 0.180 rated current DC 32 V DC 32 V 35 A SF-0603S350M-2 3.50 0.024 0.300 SF-0603S400M-2 4.00 0.018 0.500 SF-0603S500M-2 5.00 0.013 0.800 DC 24 V SF-0603S600M-2 6.00 0.010 DC 24 V 1.100 35 A *** Resistance value measured with 10 % rated current at 25 C ambient. 2 ****Melting I t calculated at 0.001 second pre-arcing time. Reliability Testing No. Test Requirement Test Condition Test Reference Soldering heat DCR change 10 % MIL-STD-202 1 One dip at 260 C for 60 seconds resistance No mechanical damage Method 210 MIL-STD-202 2 Solderability Minimum 95 % coverage One dip at 245 C for 5 seconds Method 208 DCR change 10 % MIL-STD-202 3 Thermal shock 100 cycles between -65 C and +125 C No mechanical damage Method 107 DCR change 15 % MIL-STD-202 4 Moisture resistance 10 cycles No excessive corrosion Method 106 DCR change 10 % MIL-STD-202 5 Salt spray 48 hour exposure, 5 % salt solution No excessive corrosion Method 101 DCR change 10 % MIL-STD-202 6 Mechanical vibration 0.4 inch D.A. or 30 G between 5-3000 Hz No mechanical damage Method 204 DCR change 10 % MIL-STD-202 7 Mechanical shock 1500 G, 0.5 ms, half-sine shocks No mechanical damage Method 213 No electrical opens during testing. 80 % rated current (75 % for 1 A fuses) Refer to STP 8 Life Voltage drop change shall be less than for 2000 hours at ambient temperature document 20 % of initial value. +20 C ~ +30 C Refer to STP 9 Terminal strength No mechanical damage 0.5 Kg pushing force document Environmental Characteristics Operating Temperature ..................................................................................-55 C to +125 C Asia-Pacific: Storage Conditions Tel: +886-2 2562-4117 Temperature ................................................................................................+5 C to +35 C Email: asiacus bourns.com Humidity...........................................................................................................40 % to 75 % Europe: Shelf Life........................................................................... 2 years from manufacturing date Tel: +36 88 520 390 Email: eurocus bourns.com Moisture Sensitivity Level ........................................................................................................ 1 ESD Classification (HBM) .............................................................................................. Class 6 The Americas: Tel: +1-951 781-5500 Email: americus bourns.com * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. **Bourns considers a product to be halogen free if (a) the Bromine (Br) content is 900 ppm or less (b) the Chlorine (Cl) content is www.bourns.com 900 ppm or less and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. SinglFuse is a trademark of Bourns, Inc. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. *RoHS COMPLIANT & **HALOGEN FREE *RoHS COMPLIANT LEAD FREE LEAD FREE VERSIONS ARE RoHS COMPLIANT* SinglFuse SF-0603SxxxM Series Applications n Portable memory n Cell phones n LCD monitors n Rechargeable battery packs n Disk drives n Battery chargers n PDAs n Set-top boxes n Digital cameras n Industrial controllers n MP3 players SF-0603SxxxM Series - Slow Blow Multilayer Surface Mount Fuses Typical Part Marking How to Order Construction SF - 0603 S 100 M - 2 MASKING LAYER Represents total content. Layout may MARKING vary. FUSE ELEMENT SinglFuse CERAMIC Product Designator BODY TERMINATION SMD Footprint E 0603 = 1608 (EIA 0603) size Fuse Blow Type S = Slow blow MARKING RATED CURRENT (A) C = 0.50 K = 3.00 MASKING LAYER Rated Current 1.6 0.15 D = 0.75 L = 3.50 0.80 0.15 (.063 .006) 050-600 (0.50 A - 6.00 A) (.031 .006) 0.80 E = 1.00 M = 4.00 (.031) G = 1.50 N = 5.00 Structure O = 6.00 Packaging Quantity I = 2.00 M = Multilayer 1.00 J = 2.50 0.80 0.15 0.80 0.15 (.039) Packaging Type (.031 .006) (.031 .006) .....................4,000 pieces per 7 inch reel - 2 = Tape & Reel 2.20 0.36 0.15 (.087) Product Dimensions (.014 .006) Recommended Pad Layout 1.6 0.15 0.80 0.15 (.063 .006) (.031 .006) 0.80 (.031) 1.00 0.80 0.15 0.80 0.15 (.039) (.031 .006) (.031 .006) 2.20 0.36 0.15 (.087) MM DIMENSIONS: (.014 .006) (INCHES) Current Rating Thermal Derating Curve 105 100 95 90 85 80 75 70 65 60 55 50 -55 -35 -15 5 25 45 65 85 105 125 MAXIMUM OPERATING TEMPERATURE (C) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. DERATING (%)