Features Applications n EIA 1206 (3216 metric) footprint n PoE, PoE+ n Ceramic cavity laminate design for time n Power supplies lag application n LCD/LED monitors n Surface mount packaging for automated n DC/DC converters assembly n Industrial equipment n UL 248-14 listed n RoHS compliant* and halogen free** SF-1206SP175L-2-A9 - Time Lag Ceramic Cavity Laminate SMD Fuse Clearing Time Characteristics Additional Information Clearing Time 25 C % of Current Rating Min. Max. 100 % 4 hours PRODUCT TECHNICAL INVENTORY SAMPLES LIBRARY 200 % 1 second 120 seconds Electrical Characteristics Agency 2 Rated Current Resistance Rated Interrupting Typical I t Recognition Model 2 (A) () Typ.*** Voltage Rating (A s) **** cUL: E198545 SF-1206SP175L-2-A9 1.75 0.08 63 VDC 100 A 63 VDC 1.5 3 *** Resistance value measured with 10 % rated current at 25 C ambient. Tolerance 25 %. 2 **** Melting I t calculated at 10 times rated current. Reliability Testing No. Test Test Condition Requirement Test Reference After test terminal Temperature setup: 235 +0 / -5 C 1 Solderability electrode wetting area IEC 68-2-58 Time setup: 10 sec. must be greater than 95 % Resistance to Temperature setup: 235 5 C 2 DCR change 15 % IEC 68-2-58 soldering heat Time setup: 30 sec. Temperature setup: 25 C ~ -65 C ~ 25 C ~ 125 C MIL-STD-202G DCR change 15 % 3 Thermal shock Time setup: -65 C (30 min) ~ 25 C (5 min) ~ 125 C Method 107G No mechanical damage (30 min) ~ 25 C (5 min), 5 cycles Test Condition B Heat (85 0.5 C) MIL-STD-202G DCR change 15 % 4 Humidity unload High humidity (85 1 % RH) Method 103B No mechanical damage 240 hours Test Condition A Salt spray concentration: 5 1 % MIL-STD-202G DCR change 15 % 5 Salt spray Test liquid temperature: 35 0.5 C Method 101E No mechanical damage 96 hours Test Condition A The board shall be bent by 1 mm 6 Bending DCR change 15 % IEC 60127-4 at a rate of 1 mm/sec. Frequency setup: 10 ~ 55 ~ 10 Hz DCR change 15 % MIL-STD-202G 7 Vibration Time setup: 1 minute/cycle (X-Y-Z, No mechanical damage Method 201A 120 cycles, 6 hours) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be halogen free if (a) the Bromine (Br) content is 900 ppm or less (b) the Chlorine (Cl) content is 900 ppm or less and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. SinglFuse is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-1206SP175L-2-A9 - Time Lag Ceramic Cavity Laminate SMD Fuse Environmental Characteristics Current Rating Thermal Derating Curve 140 Operating Temperature -55 C to + 125 C 120 Storage Conditions 100 Temperature +15 C to +30 C 80 Humidity 20 % to 70 % 60 Shelf Life (from manufacturing date) 2 years 40 Moisture Sensitivity Level 1 20 1 ESD Classification Class 6 0 1 per AEC-Q200-2, HBM -55 -35 -15 5 25 45 65 85 105 125 AMBIENT TEMPERATURE (C) Typical Part Marking How to Order Packaging SF - 1206 SP 175 L -2 - A9 Represents total content. Layout may vary. Reel Dimension 7-inch Tape and Reel SinglFuse Specification EIA 481-2 Product Designator SMD Footprint Quantity 4,000 pieces L 1206 = EIA 1206 Packaging Code -2 (3216 metric) Fuse Blow Type SP = Time Lag Rated Current Rated Part 175 = 1.75 A Current Marking Structure Type 1.75 A L L = Ceramic Cavity Laminate Packaging Type - 2 = Tape & Reel TNA (Type Number Assignment) Designator Product Dimensions Recommended Pad Layout 3.1 0.2 1.52 (.122 .008) (.060) 1.78 1.6 0.2 0.9 0.3 (.070) (.063 .008) (.035 .012) L 1.1 (.043) 0.5 0.25 1.6 0.2 (.019 .010) (.063 .008) MM MM DIMENSIONS: DIMENSIONS: (INCHES) (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. DERATING (%)