SF-2410FP0125T-2 Bourns

F 3 A SinglFuse SF-2410FP-T Series Features n Single blow fuse for overcurrent protection n EIA 2410 (6125 metric) footprint n Ceramic tube design for fast acting precision fusing speed applications n UL 248-14 listed n Surface mount packaging for automated assembly n RoHS compliant* and halogen free** SF-2410FP-T Series Fast Acting Precision SMD Fuses Electrical Characteristics Certifications Rated Typical Resistance Rated Interrupting 2 2 Model Current Fusing Time I t (A s) cUL () Typ.*** Voltage Rating (A) **** E198545 SF-2410FP0062T-2 0.062 6.653 0.0012 3 SF-2410FP008T-2 0.08 4.974 0.0017 3 SF-2410FP010T-2 0.1 3.014 0.0043 3 SF-2410FP0125T-2 0.125 2.044 0.0094 3 SF-2410FP016T-2 0.16 0.8655 0.0116 3 SF-2410FP020T-2 0.2 1.8535 0.0517 3 SF-2410FP025T-2 0.25 1.119 0.0528 3 SF-2410FP0315T-2 0.315 0.843 0.1365 3 SF-2410FP0375T-2 0.375 0.732 0.1502 3 SF-2410FP040T-2 0.4 0.4995 0.2149 3 SF-2410FP050T-2 0.5 0.476 0.358 3 Open within 50 A 125 VAC SF-2410FP075T-2 0.75 0.2065 0.3761 3 5 sec. 125 50 A 125 VDC at 200 % VAC SF-2410FP100T-2 1 0.158 0.4143 3 300 A 32 VDC rated current SF-2410FP150T-2 1.5 0.114 1.0606 3 SF-2410FP200T-2 2 0.0605 1.08 3 SF-2410FP250T-2 2.5 0.044 1.1471 3 SF-2410FP300T-2 3 0.036 1.548 3 SF-2410FP315T-2 3.15 0.033 2.6485 3 SF-2410FP350T-2 3.5 0.029 2.695 3 SF-2410FP400T-2 4 0.021 3.9744 3 SF-2410FP500T-2 5 0.013 6.175 3 SF-2410FP700T-2 7 0.01 9.016 3 SF-2410FP800T-2 8 0.0085 16.758 3 SF-2410FP1000T-2 10 0.006 24.42 3 *** Resistance value measured with 10 % rated current at 25 C ambient. Tolerance 30 %. 2 **** Melting I t calculated at 10 times rated current. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be halogen free if (a) the Bromine (Br) content is 900 ppm or less (b) the Chlorine (Cl) content is 900 ppm or less and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. SinglFuse is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this dment aocu re subject to specific legal disclaimers as set forth on the last pathge ofis document, an d at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS COMPLIANT & **HALOGEN FREE *RoHS COMPLIANT LEAD FREE LEAD FREE VERSIONS ARE RoHS COMPLIANT* F 3 A SinglFuse SF-2410FP-T Series Applications n PC Servers n Notebooks n Power Supplies n LCD Monitors n Game Consoles n LCD Backlight Inverters n White Goods n POE, POE+ SF-2410FP-T Series Fast Acting Precision SMD Fuses Reliability Testing No. Test Test Condition Requirement Test Reference Temperature setup: 235 5 C After test terminal electrode wetting 1 Solderability IEC 60068-2-58 Time setup: 10 1 sec. area must be greater than 95 % Resistance to Temperature setup: 235 5 C 2 DCR change 15 % IEC 60068-2-58 soldering heat Time setup: 30 5 sec. Temperature setup: DCR change 15 % 25 C ~ -65 C ~ 25 C ~ 125 C No mechanical damage MIL-STD-202G 3 Thermal shock Time setup: -65 C (30 min) Method 107G ~ 25 C (5 min) ~ 125 C (30 min) Test Condition B ~ 25 C (5 min), 5 cycles Heat (85 0.5 C) DCR change 15 % MIL-STD-202G 4 Humidity unload High Humidity (85 1 % RH) No mechanical damage Method 103B 240 hours Test Condition A Salt spray concentration: 5 1 % DCR change 15 % MIL-STD-202G 5 Salt spray Test liquid temperature: 35 0.5 C No mechanical damage Method 101E 96 hours Test Condition A The board shall be bent by 1 mm 6 b ending DCR change 15 % IEC 60127-4 at a rate of 1 mm/sec. Frequency setup: 10 ~ 55 ~ 10 Hz DCR change 15 % MIL-STD-202G 7 Vibration Time setup: 1 Minute/cycle No mechanical damage Method 201A (X-Y-Z, 120 cycles, 6 hours) Environmental Characteristics Construction Operating Temperature .................................................................................. -55 C to +125 C END CAP (GOLD-PLATED Storage Conditions b RASS) Temperature .............................................................................................. +15 C to +30 C Humidity........................................................................................................... 20 % to 70 % Shelf Life............................................................................ 2 years from manufacturing date Moisture Sensitivity Level .........................................................................................................1 CERAMIC Tub E ESD Classification (HBM)...............................................................................................Class 6 Agency Recognition Packaging Quantity How to Order SF - 2410 FP 0062 T - 2 1,000 pieces per 7-inch reel UL File Number ............................ E198545 SinglFuse Product Designator SMD Footprint 2410 = EIA 2410 (6125 metric) Fuse Blow Type FP = Fast Acting Precision Rated Current 0062 ~ 1000 (62 mA ~ 10 A) Structure Type T = Ceramic Tube Packaging Type - 2 = Tape & Reel Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.