SF-2410HI0375T-2 Bourns

T 2.5A SinglFuse SF-2410HI-T Series Features n Single blow fuse for overcurrent protection n EIA 2410 (6125 metric) footprint n Ceramic tube design for high inrush fusing speed applications n UL 248-14 listed n Surface mount packaging for automated assembly n RoHS compliant* and halogen free** SF-2410HI-T Series High Inrush SMD Fuses Electrical Characteristics Certifications Rated Typical Resistance Rated Interrupting 2 2 Model Current Fusing Time I t (A s) cUL () Typ.*** Voltage Rating (A) **** E198545 SF-2410HI0375T-2 0.375 0.6208 0.4147 3 SF-2410HI050T-2 0.5 0.3462 0.495 3 SF-2410HI075T-2 0.75 0.1666 1.2632 3 SF-2410HI100T-2 1 0.1079 1.9933 3 SF-2410HI150T-2 1.5 0.057 2.82 3 Open within 50 A 125 VAC SF-2410HI200T-2 2 0.0509 7.488 3 1-60 sec. 125 50 A 125 VDC at 200 % VAC SF-2410HI250T-2 2.5 0.0317 16.771 3 300 A 32 VDC rated current SF-2410HI300T-2 3 0.0228 24.99 3 SF-2410HI350T-2 3.5 0.0196 24.908 3 SF-2410HI400T-2 4 0.015 27.056 3 SF-2410HI500T-2 5 0.0112 50.308 3 SF-2410HI700T-2 7 0.0083 100.06 3 *** Resistance value measured with 10 % rated current at 25 C ambient. Tolerance 30 %. 2 **** Melting I t calculated at 10 times rated current. Environmental Characteristics Agency Recognition Operating Temperature .................................................................................. -55 C to +125 C UL File Number ............................ E198545 Storage Conditions Temperature .............................................................................................. +15 C to +30 C Humidity........................................................................................................... 20 % to 70 % Shelf Life............................................................................ 2 years from manufacturing date Moisture Sensitivity Level .........................................................................................................1 ESD Classification (HBM)...............................................................................................Class 6 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be halogen free if (a) the Bromine (Br) content is 900 ppm or less (b) the Chlorine (Cl) content is 900 ppm or less and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. SinglFuse is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this dment aocu re subject to specific legal disclaimers as set forth on the last pathge ofis document, an d at www.bourns.com/docs/legal/disclaimer.pdf. *RoHS COMPLIANT & **HALOGEN FREE *RoHS COMPLIANT LEAD FREE LEAD FREE VERSIONS ARE RoHS COMPLIANT* T 2.5A SinglFuse SF-2410HI-T Series Applications n PC Servers n Notebooks n Power Supplies n LCD Monitors n Battery Protection n LCD Backlight Inverters n White Goods n POE, POE+ SF-2410HI-T Series High Inrush SMD Fuses Reliability Testing No. Test Test Condition Requirement Test Reference Temperature setup: 235 5 C After test terminal electrode wetting 1 Solderability IEC 60068-2-58 Time setup: 10 1 sec. area must be greater than 95 % Resistance to Temperature setup: 235 5 C 2 DCR change 15 % IEC 60068-2-58 soldering heat Time setup: 30 5 sec. Temperature setup: 25 C ~ -65 C ~ 25 C ~ 125 C DCR change 15 % MiL-STD-202G 3 Thermal shock Time setup: -65 C (30 min) No mechanical damage Method 107G ~ 25 C (5 min) ~ 125 C (30 min) Test Condition B ~ 25 C (5 min), 5 cycles Heat (85 0.5 C) DCR change 15 % MiL-STD-202G 4 Humidity unload High Humidity (85 1 % RH) No mechanical damage Method 103B 240 hours Test Condition A Salt spray concentration: 5 1 % DCR change 15 % MiL-STD-202G 5 Salt spray Test liquid temperature: 35 0.5 C No mechanical damage Method 101E 96 hours Test Condition A The board shall be bent by 1 mm 6 Bending DCR change 15 % IEC 60127-4 at a rate of 1 mm/sec. Frequency setup: 10 ~ 55 ~ 10 Hz DCR change 15 % MiL-STD-202G 7 Vibration Time setup: 1 Minute/cycle No mechanical damage Method 201A (X-Y-Z, 120 cycles, 6 hours) Typical Part Marking How to Order Construction Represents total content. Layout may vary. SF - 2410 HI 0375 T - 2 END CAP (G O L D - P L AT ED SinglFuse B R A S S) Product Designator T SMD Footprint 2.5A 2410 = EIA 2410 (6125 metric) C E R A M i C T U B E Fuse Blow Type Rated Current Part Marking HI = High inrush 375 mA 375 mA Rated Current Packaging Quantity 0375 ~ 700 (375 mA ~ 7 A) 500 mA 500 mA Structure Type 750 mA 750 mA 1,000 pieces per 7-inch reel T = Ceramic Tube 1 A 1 A Packaging Type - 2 = Tape & Reel 1.5 A 1.5 A 2 A 2 A 2.5 A 2.5 A 3 A 3 A 3.5 A 3.5 A 4 A 4 A 5 A 5 A 7 A 7 A Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.