Ethernet to Digital Relay ED-538 ED-538 ETHERNET TO Digital IO Relay ED-538 8 Digital Inputs and 4 Form A Relays Drives high current and high voltage loads Ideal for inductive, capacitive & resistive loads Factory floor process control and automation Network enable your NuDAM/ADAM modules o o -30 C to +80 C Temperature range +5V to +30V DC Input Power Digital Channels Inputs Input Channels 8 non-isolated input channels NPN/PNP Jumper selectable pull up for NPN, active low, type sensors and pull down for PNP, active high, type sensors Logic Level 0: 0V to +1V Logic Level 1: +2.0V to +30V Latched Inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged Counter Inputs: User programmable- counts positive or negative transitions 0-65335 Relay Outputs Relay Type 4 Form A (SPST: Single Pole Single Throw) - Normally Open When power is removed from the ED-538 the relay is Open Maximum Output Load Voltage 60VDC Contact Rating 5 A 30 VDC, 5 A 250VAC, 5 A 110 VAC Inductive Load 2 A Resistive Load 5 A Breakdown Voltage 500 VAC Relay On/Off Time 10 ms (Max) Initial Insulation Resistance 1G min 500 VDC Expected Life 100,000 times (Typical) Initial Contact Resistance 30 milli-ohms (Max) Pulse Output 0.3 Hz at rated load Connect, Configure, ControlEthernet Connection Digital Inputs 24V Power 5V Power ED-538 Ethernet 8 DI + 4 Relays Usage Model for ED-538 Form A Relay Gateway RS485 Remote access for ASCII software maintenance and commands - LabView, monitoring MATLAB, Agilent VEE CNC Power from laptop Machines / Light for configuration PLCs Gauges / Motor Dials Counters Fan Dual redundant power supply Temperature Conveyor Sensors Belt +44(0) 151 220 2500 sales brainboxes.com www.brainboxes.com