325PI Nylon Cable Chain with opening frames Inner height (D) 25 mm Single link construction with central large anti-friction pivot, for high torsion and tensile resistance. Frames opening from inner radius. Vertical separators available. D B 2,5 Separator C - Unassembled Part.no S325L A Part.no S325LMC - Assembled A B C D R Weight/m Chain Technical characteristics mm mm mm mm mm kg Part Number when self-supported 57 38 40 25 075-100-125-150 1,15 325PI040 * Speed 10 m/s 77 38 60 25 075-100-125-150 1,30 325PI060 * 2 Acceleration 50 m/s 93 38 76 25 075-100-125-150 1,40 325PI076 * 3 120 38 103 25 075-100-125-150 1,70 325PI103 * For higher requirements please consult our technical dept. *Complete the code by inserting the value of the radius (R): Ex. 325PI040 0 7 5 For sliding applications, technical data can slightly change according to frequency, added R H N M N1 M1 LS N weight and environment. LS mm mm mm mm mm mm 2 075 188 140 325 185 420 100 238 165 405 275 635 45 125 288 190 485 360 855 M H 150 338 215 565 445 1075 LS LS 2 M1 MOVING POINT H 140 N1 FIXED POINT Length of chain (L) LS Half travel distance() 2 plus length of curve (M) or (M1) LS L= + M o M1 2 114 R R Self-Supporting End Brackets Capacity Diagram The end brackets set allows the two ends of the chain to be The maximum length of the attached to the equipment. Set complete with tiewrap clamps 325PI LS self-supporting capacity() available on request. 2 Nylon Cable Chain in relationship to the weight Nylon Type Bright Zinc Plated Steel with opening frames of the cables and hoses Type*** contained per linear metre. 10 9 8 7 6 5 4,5 4 3,5 3 2,5 2 1,5 3 Separation System 1 To choose the separators see page. 188 0,5 0 0,5 1 1,5 2 2,5 LS Max unsupported length Fig. A Fig. B 2 Chain fixed outside or inside the Chain fixed outside/inside the radius. (Fig B) radius. (Fig A) LS LS 60,5 L 66,5 2 50 L 50 8,5 14 7 24 38 24 8 8 7 5,2 16 The red marking in the diagram area considers the 6,5 40 F2 F1 F difference of weight between various widths of chain. Chain F Chain F2 F1 Type mm Type mm mm LS For applications with 325PI...040 51 325PI...040 22 25,5 2 and weights not included in 325PI...060 71 325PI...060 42 45,5 the area of the diagram 325PI...076 87 325PI...076 58 61,5 showing self-supporting 325PI...103 114 325PI...103 85 88,5 capacity, verify the possible use of support rollers (see Nylon Type Bright Zinc Plated Steel page 30). Part Numbers Type Part Numbers Complete Set Assembled Complete Set Assembled Chain End Brackets Chain End Brackets Type Set Type Set 325PI... AN325P *KM 325PI... A325LK Tiewrap Clamp Complete Set Unassembled Chain End Brackets Suitable to long travel distance. Part Number To choose the guide channel Type Set Assembled see page 56 325PI... AN325P *K CFC325L *KM Unassembled Tiewrap Clamp CFC325L *K Part Number * Inner width (C) Assembled ***Available on request in stainless steel CFC325L *KM Unassembled For further information please consult Brevetti Stendaltos CFC325L *K Technical Office 115 Additional load (kg/m)