335PS Replace 335PI Serie Nylon cable chain with nylon cover openable to snap Inner height (D) 35 mm Separator A The chain has single link. Nylon cover Part. no S4353 - Unassembled C is opened only on inner radius. - Assembled Part. no S4353MC Supplementary movable separators. D B 3 A B C D R Weight/m Chain Technical characteristics mm mm mm mm mm kg Part Number when self-supported 66,5 50 50 35 100-125-150-200 1,35 335PS050 * Speed 10 m/s 92,5 50 76 35 100-125-150-200 1,57 335PS076 * 2 acceleration 50 m/s 119,5 50 103 35 100-125-150-200 1,81 335PS103 * 3 166,5 50 150 35 100-125-150-200 2,21 335PS150 * For higher requirements please consult our technical dept. *Complete the code by inserting the value of the radius (R): Ex. 335PS050 1 0 0 For sliding applications, characteristics techniques may vary depending on the frequency, added weight and work environment. LS N R H N M N1 M1 LS 2 mm mm mm mm mm mm Length of chain (L) 100 250 204 420 350 790 LS 125 300 229 500 445 1025 52 H M Half travel distance() 2 150 350 254 580 540 1260 plus length of curve (M) or (M1) 200 450 304 735 730 1725 LS L= + M or M1 2 LS LS 2 MOVING POINT M1 H 140 FIXED POINT N1 128 R RNEW CHAIN Self-Supporting End Brackets Capacity Diagram The end brackets set allows the two ends of the chain to 335PS The maximum length of the be attached to the equipment. Nylon cable chain LS self-supporting capacity() Set complete with tiewrap clamps available on request. with nylon cover 2 openable to snap in relationship to the weight Nylon Type of the cables and hoses contained per linear metre. 15 13 10 9 8 7 6 5 4 3 2,5 3 Fig. A 2 The chain can be fixed frontally, 1,5 inner or outer radius. (Fig A) 1 0 0,5 1 1,5 2 2,5 3 LS Max unsupported length L 87 2 17,5 15 17,5 24 5,5 LS 17 15 LS 2 F F1 6,5 5,5 The red marking in the diagram area considers the difference of weight between Chain F F1 various widths of chain. type mm mm 335P...050 35 61 335P...076 61 87 LS 335P...103 88 114 For applications with 2 335P...150 135 161 and weights not included in the area of the diagram showing self-supporting Nylon Type capacity, verify the possible Part Numbers use of support rollers (see Complete Set Assembled page 30). Chain End Brackets Type Set 335 AN335P *KM ** Complete Set Unassembled Chain End Brackets Type Set 335 AN335P *K Tiewrap Clamp Part Number 335 PFN335 * For further information please * Inner width (C) consult Brevetti Stendaltos ** 1=Pos.1 2=Pos.2 3=Pos.3 Technical Office 129 Additional load (kg/m)