AN435P050K Brevetti

435PU Replace 435PI/PE Series Nylon Protection Cable Chain with opening covers A Inner height (D) 35 mm Separator Sideband & Frame construction with - Unassembled Part.no S4353 large anti-friction single-pin. Assembled* Part.no S4353MCI - Part.no S4353MCE Vertical separators are available. - Assembled** D B 3 Pin Part.no PG4353 * for chain opening outer radius ** for chain opening inner radius C A B C D R Weight/m Chain Technical characteristics mm mm mm mm mm kg Part Number when self-supported 60 49 40 35 075-100-125-150-200 1,25 435PU040 * Speed 10 m/s 70 49 50 35 075-100-125-150-200 1,40 435PU050 * 2 Acceleration 50 m/s 80 49 60 35 075-100-125-150-200 1,45 435PU060 * 3 96 49 76 35 075-100-125-150-200 1,60 435PU076 * For higher requirements please consult our 117 49 97 35 075-100-125-150-200 1,75 435PU097 * technical dept. 123 49 103 35 075-100-125-150-200 1,90 435PU103 * LS N 145 49 125 35 075-100-125-150-200 2,10 435PU125 * LS 170 49 150 35 075-100-125-150-200 2,35 435PU150 * 2 *Complete the code by inserting the value of the radius (R): Ex. 435PU040 0 6 0 50 H M RH N M Length of chain (L) mm mm mm mm LS 075 199 155 340 Half travel distance() 2 100 249 175 415 plus length of curve (M) 125 299 200 495 150 349 230 575 LS L= + M 200 449 275 730 2 130 RNEW CHAIN Self-Supporting End Brackets Capacity Diagram The end brackets set allows the two ends of the chain to be The maximum length of the attached to the equipment. Set complete with tiewrap clamps 435PU LS self-supporting capacity() available on request. 2 Nylon Protection in relationship to the weight Cable Chain with Nylon Type Nylon Type of the cables and hoses opening covers contained per linear metre. 15 13 10 9 8 7 6 5 4 3 2,5 Separation System 2 3 To choose the separators see 1,5 Fig. A Fig. B page. 198 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B) 1 0 0,5 1 1,5 2 2,5 3 inner or outer radius. (Fig A) See end brackets mounting variations page 31 LS Max unsupported length 2 L 69 L 65 17 LS 15 LS 2 17 Bright Zinc Plated 17 7 11 24 11 5.5 Steel Type*** 15 F F The red marking in the diagram area considers the 6,5 difference of weight between L 107,5 Chain F Chain F various widths of chain. Type mm Type mm 435PU040 51 435PU040 26,5 8,5 24 8,5 435PU050 61 435PU050 36,5 LS For applications with 435PU060 71 435PU060 46,5 2 12 6,5 and weights not included in 435PU076 87 435PU076 62,5 F the area of the diagram 435PU097 108 435PU097 83,5 435PU103 114 435PU103 89,5 showing self-supporting 435PU125 136 435PU125 111,5 capacity, verify the possible F = A-30 435PU150 161 435PU150 136,5 use of support rollers (see page 30). Bright Zinc Plated Steel Nylon Type Nylon Type Type Part Numbers Part Numbers Part Numbers Complete Set Assembled Complete Set Assembled Complete Set Assembled A435P *KM ** AN435P *KM AN435KM **** Complete Set Unassembled Complete Set Unassembled Complete Set Unassembled A435P *K ** AN435P *K AN435K **** Tiewrap Clamp Tiewrap Clamp Tiewrap Clamp Part Number Part Number Part Number Complete Set Assembled Complete Set Assembled Complete Set Assembled CFC435M *KM CFC435M *KM CFC435M *KM Complete Set Unassembled Complete Set Unassembled Complete Set Unassembled CFC435M *K CFC435M *K CFC435M *K * Inner width (C) ****1=Pos.1 2=Pos.2 3=Pos.3 ** 1=Pos.1 2=Pos.2 3=Pos.3 5=Pos.5 6=Pos.6 *** Available on request in stainless steel 131 Additional load (kg/m)