CleO35-WIFI Module Datasheet Version 1.0 Document Reference No.:BRT 000117 Clearance No.:BRT 082 Bridgetek Pte Ltd Datasheet CleO35-WIFI Module 1.1 Features 1 Introduction The CleO35-WIFI consists of ESP-12S WIFI module The CleO35-WIFI module is a Wi-Fi accessory for the developed by Ai-thinker using an ESP8266. For the CleO series the smart TFT display for Arduino. full list of ESP8266s features, refer to the ESP8266 Designed with an ESP-12S Wi-Fi module from Ai-thinker Datasheet. In addition, CleO35-WIFI has the using core processor ESP8266, the ESP8266 is among following features: the most integrated Wi-Fi chips in the industry. Measuring just 5mm X 5mm, it requires minimal external circuitry and integrates a 32-bit Tensilica MCU, Supports standard IEEE802.11 b/g/n digital peripheral interface, antenna switch, RF balun, Integrated low power 32-bit MCU power amplifier, low noise receive amplifier, filters and power management modules all in one small package. Wi-Fi 2.4GHz, Support WPA/WPA2 Support STA/AP/STA+AP operation mode The CleO35-WIFI module comes with a standard 16 pin 0.5mm pitch FFC cable, suitable for connecting directly +20dBm output power in 802.11b mode to CleO35 modules or via the CleO IO Shield to CleO50 On board PCB antenna modules enabling wireless communications to the system. Compatible with Bridgetek CleO35 16 Pin 0.5mm Pitch FFC Flex interface As a plug in accessory to CleO it extends the CleO modules capabilities to include wireless monitor and control for smart devices around the home. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Bridgetek Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Bridgetek Pte Ltd, 178 Paya Lebar Road, 07-03, Singapore 409030. Singapore Registered Company Number: 201542387H Copyright Bridgetek Pte Ltd 1 CleO35-WIFI Module Datasheet Version 1.0 Document Reference No.: BRT 000117 Clearance No.: BRT 082 2 Ordering Information Part No. Description Wi-Fi accessory, built-in ESP-12S Wi-Fi module with 16pin 0.5mm pitch FFC CleO35-WiFi1 flex interface 3 Program Support Demo applications are provided for CleO Wi-Fi modules by Bridgetek. Visit Bridgeteks website