FT51A-EVM Development Module Datasheet Version 1.0 Document Reference No.: FT 001140 Clearance No.: FTDI 478 Future Technology Devices International Datasheet FT51A-EVM Development Module FT51A-EVM is an FT51A development module with the following features: display, heart-rate monitor, temperature sensor and force sensitive resistor. 1 Introduction In addition to the features listed in the FT51A datasheet, the FT51A-EVM has the following The FT51A-EVM is a development module for FTDIs features: FT51AQ, one of the devices from FTDIs range of 8-bit microcontrollers with USB interface bridging features 2 20 X 2 characters, LCD display, with I C interface integrated. FT51A is a MCU which includes the and RGB backlight. following features: USB client and USB hub interfaces, 2 8051 core, 8-bit ADC, UART, SPI, I C, 245 FIFO and Heart-Rate Monitor with filtered and amplified PWM. analogue output 2 The FT51A-EVM demonstrates the FT51A series I C and SPI interfaces, the ADC input, PWM and GPIO Force sensitive resistor features. It contains a 28 pin header which allows easy access to all the FT51AQs IO pins, as well as the SPI temperature sensor debug and reset pins. This module also comes preloaded with the FT51A-EVM firmware that allows Push buttons controls and LED indicator users to use all the features of the module without developing firmware. Interface footprints to allow for communication with FTDIs FT8xx modules and TTL-232R cables 1.1 Features Upstream and downstream USB ports which allows The FT51A-EVM is fitted with a FT51AQ many of the for direct connection cascading. features of the FT51A series can be utilized with this module. For a full list of the FT51A series features Debugger interface header used for debugging and please see the FT51A datasheet which can be found programming the FT51AQ. Designer for operation by clicking here. with FTPD-1. See FTPD-1 datasheet for details about this module. Onboard jumper for configuring the module to be in self powered or USB powered. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright 2015 Future Technology Devices International Limited 1 FT51A-EVM Development Module Datasheet Version 1.0 Document Reference No.: FT 001140 Clearance No.: FTDI 478 Table of Contents 1 Introduction .................................................................... 1 1.1 Features .................................................................................... 1 2 Driver Support ................................................................ 3 3 Ordering Information ...................................................... 4 4 FT51A-EVM Signals and Configurations ........................... 5 4.1 FT51A-EVM Pin Out ................................................................... 5 4.2 Connector Descriptions ............................................................. 6 4.3 I/O Pin Feature Options .......................................................... 10 5 Module Configurations .................................................. 11 5.1 Jumper Configuration Options ................................................ 11 6 Using Preloaded Firmware ............................................ 12 7 Programming Firmware to the MTP Memory ................. 13 8 Module Dimensions ....................................................... 14 9 UMFT51AA Module Circuit Schematic ............................ 15 10 Contact Information ...................................................... 20 Appendix A References ................................................... 18 Document References ..................................................................... 18 Acronyms and Abbreviations ........................................................... 18 Appendix B List of Figures and Tables ............................. 19 List of Figures ................................................................................. 19 List of Tables ................................................................................... 19 Appendix C Revision History ........................................... 20 Copyright 2015 Future Technology Devices International Limited 2