LDSBus Multi Sensor Datasheet Version 1.0 Document Reference No.: BRT 000360 Clearance No.: BRT 181 LDSBus Multi Sensor Datasheet 1 Introduction 1.1 Features 3in1 and 4in1 combination options The LDSBus Multi Sensor consists of 4 sensors in a compact low-profile design. Temperature, 3 levels of motion sensitivity with humidity, Passive Infra-Red (PIR) based customizable motion re-trigger interval and motion detection and ambient light wide angle of motion detection measurement sensors are incorporated in this multi-sensor device. Available in 4in1 and 3in1 o Measures temperature up to 70 C with (without motion detector) combinations, the accuracy of 0.2C device can be flush mounted on ceilings or swivel mounted on walls. The multi-sensor Measures humidity from 0 to 95% with works with the Bridgetek PanL Smart Living, accuracy of 2%RH IoTPortal and LDSBus Python SDK products. Measures ambient light up to 64K Lux Implements the Bridgetek LDSBus protocol. Low power consumption 5V, 180mW o o Operating temperature range : 0 C to +70 C Swivel mount and Flush mount options Supported platform application: Bridgetek PanL Smart Living, IoTPortal and LDSBus Python SDK (Visit LDSBus Multi Sensor Datasheet Version 1.0 Document Reference No.: BRT 000360 Clearance No.: BRT 181 2 Part Numbers Part Naming LS010101A LDSBus 4in1 Sensor (Motion, Temperature, Humidity & Brightness)-Flush LS011101A LDSBus 4in1 Sensor (Motion, Temperature, Humidity & Brightness)-Swivel LS010201A LDSBus 3in1 Sensor (Temperature, Humidity & Brightness)-Flush LS011201A LDSBus 3in1 Sensor (Temperature, Humidity & Brightness)-Swivel Copyright Bridgetek Pte Ltd 2