Type: LEDO/2 Delay On Operate, Multi-voltage Timer Terminal *NEW* 17.5mm DIN rail housing Protection to IP20 Supply Initiated Delay On Operate timing function 7 Selectable time ranges (0.1 seconds 100 hours) Fine adjustment of selected time range Multi-voltage input (12 230V AC/DC) 1 x DPDT relay output 8A Green LED indication for supply / timing status Red LED indication for relay status Conforms to IEC 61812 Dims: to DIN 43880 W. 17.5mm FFUUNNCCTTIIOONN DDIIAAGGAAMM TTEECCHHNNIICCAALL SSPPEECCIIFFIICCAATTIIOONN Supply voltage U (A1, A2): 12 230V AC/DC Frequency range: 48 - 63Hz (AC supplies) Supply variation: AC: +15/- 10% DC: +/-15% Supply Overvoltage category: III (IEC 60664) A1, A2 Rated impulse withstand voltage: 4kV (1.2/50S) IEC 60664 Power consumption (max.): 12V 24V 110V 230V AC: 0.6VA 0.8VA 2.6VA 6.8VA DC: 0.52W 0.48W 0.94W 1.9W Timing function: Delay On Operate (Supply Initiated) Timing ranges (7): Seconds: Minutes: Hours: Output 0.1 1 0.1 1 0.1 1 18 (28) 1 10 1 10 1 10 10 - 100 15 (25) 2 Reset time : <100mS Accuracy: 1% of maximum full scale DO2SU0715 16 (26) Adjustment accuracy: < 5% of maximum full scale t Repeat accuracy: 0.5% at constant conditions (IEC 61812) Drift with temperature: 0.05% / C LED operation: Drift with voltage: 0.2% / V 1 Power on indication / Timing : Green LED Relay status Red LED LED Off LED On LED Flashing Ambient temp: -20 to +60C Relative humidity: +95% Output (15, 16, 18/25, 26, 28): DPDT relay Installation work must be carried IINNSSTTAALLLLAATTIIOONN AANNDD SSEETTTTIINNGG Output rating: AC1 250V 8A (2000VA) out by qualified personnel. AC15 250V 5A (no), 3A (nc) BEFORE INSTALLATION, ISOLATE THE SUPPLY. DC1 25V 8A (200W) Connect the unit as required. Electrical life: 150,000 ops at rated load Setting the unit. Dielectric voltage: 2kV AC (rms) IEC 60947-1 Rated impulse withstand voltage: 4kV (1.2/50S) IEC 60664 Set the Range to the required position (depending on whether seconds, minutes or hours Housing: Orange flame retardant UL94 are required). Weight: 70g Set the Set % adjustment as required. The Set % is a % of the selected range so for Mounting option: On to 35mm symmetric DIN rail to BS EN 60715 example, a 30% setting on the 1 10 hour range will give 3 hours. or direct surface mounting via 2 x M3.5 or 4BA screws Applying power. using the black clips provided on the rear of the unit. 2 Terminal conductor size 2 x 2.5mm solid or stranded Apply power across terminals A1 and A2 and the green LED will start flashing indicating timing in progress. Approvals: Conforms to IEC 61812. The relay will remain de-energised (contacts 15 / 16 and 25 / 26 closed, 15 / 18 and 25 / 28 CE, C-tick and RoHS Compliant. open) and red LED extinguished. EMC: Immunity: EN 61000-6-2 (EN 61000-4-3 10V/m 80MHz - 2.7GHz) After the delay period t has elapsed, the relay will energise (contacts 15 / 16 and 25 / 26 open, Emissions: EN 61000-6-4 15 / 18 and 25 / 28 closed) and the red LED will illuminate. The green LED will remain permanently lit. The whole timing process is repeated by removing and re-applying power. Note: 1 In accordance with IEC 61812, the green LED is permitted to extinguish during a voltage dip or momentary interruption of the power supply providing the state of the output relay does not change. 2 The dip / interruption (reset) duration and levels are defined in the product standard however, the standard allows for these to be different from the levels actually specified. CCOONNNNEECCTTIIOONN DDIIAAGGRRAAMM SSEETTTTIINNGG DDEETTAAIILLSS DDIIMMEENNSSIIOONNSS 89 (exc. clips) 1. Power supply status / 67.5 Timing (Green) LED 45 2. Relay output status (Red) LED 3. Set % adjustment 4. Time delay Range selector Insert screwdriver to release clips Withdraw clips fully when surface mounting 92 (+/- 1mm) all dimensions in mm. Broyce Control Ltd., Pool Street, Wolverhampton, West Midlands WV2 4HN. England LEDO 2-1-A 012457 Tel: +44 (0) 1902 773746 Fax: +44 (0) 1902 420639 Email: sales broycecontrol.com Web: www.broycecontrol.com The Information provided in this literature is believed to be accurate (subject to change without prior notice) however, use of such information shall be entirely at the users own risk. 29 49.5 66.5X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Broyce Control manufacturer: Other Similar products are found below : LART 12-230V AC/DC LXCVR 230V LBVR/A 12-24VDC LMCCR-10A LESW 12-230V AC/DC