1500 Standard & 1300 Hi Inrush Switches 150A to IEC65 and 16A 250Vac
1500 Series 16(4)A 250Vac T125
UL CSA 16A Non Ind 250Vac, (2 posn) 250Vac 1hp, 125Vac 1/2hp,
(3 posn) 250Vac 1/2hp, 125Vac 1/4hp UL 85C, file E45221, CSA file LR10990
In house test
Inrush 36A to EN61058-1 & 20A 28Vdc
1300 series 16(6)A 250Vac T125 5E4 (50,000 Ops.) 150A Inrush to IEC 65,
UL CSA 20A 250Vac 1hp, 125Vac 1/2hp UL 85C, file E45221, CSA file LR10990
In house test
20A 28Vdc
3mm contact gap except if marked . Technical data on pages 4 & 5 (switches), 66 (indicators)
C 1300 A L ---
TERMINAL FUNCTION ROCKER BODY PRINT, COLOUR, VOLTAGE ETC
TERMINAL FUNCTION ROCKER
C A Softline Matt
Approvals & ratings vary with function
12 3
On Off Switches - ON when pressed over terminal 1
9.1
Standard Hi Inrush B Splashproof (with Arcshield)
6.3 x 0.8
Matt
ON - OFF
1500
1300
H
Approvals apply to C & T
terminals only
9.1
H Slotted (for custom Adaptors)
ON - OFF
1501
not momentary
(momentary ON)
HP rating N/A
4.8 x 0.8*
K
ON - OFF
1502
(momentary OFF)
HP rating N/A
9.1 V Curved Matt or gloss
2.0
1.2
1510
ON - ON
2.8 x 0.8*
HP rating N/A
W Splashproof (with Arcshield)
T
Matt
ON - ON
1511
7.0
(momentary 1 side)
HP rating N/A
2.1
Solder X Two colour Matt
1520
ON - OFF only (not momentary)
125V & 250V 1/2 HP ON - OFF - ON
U H terminal rated
T100 only
3.2
1521
2.1 ON - OFF - ON
HP rating N/A F Flat lens Gloss (0430 only)
H terminal rated (momentary 1 side)
T100 only
Right angle T solder terminal
X
1522
ON - OFF - ON
HP rating N/A
H terminal rated (momentary 2 sides)
A Softline lens Matt (0430 only)
T100 only
9.1
as F but with raised profile
4.0
Indicator
0430
PCB 0.8Sq*
Technical data on page 66
X terminal N/A
*N/A for 1300 series
20
tel: +44 (0)20 8979 3232 Arcolectric email: info@arcoswitch.co.ukEnhanced Splashproofing
C1500AR --- C1500AL --- C1500XL ---
T1500AR --- T1500AL --- T1500XL ---
collar
feather-edge seal
1500 W and B splashproof options
Feather edge seals and a close fitting collar protect current
carrying parts from moisture.
B option has Hytrel collar/seals for enhanced protection. C1510AL --- C1520AL --- C0430AL ---
T1510AL --- T1520AL ---
T0430AL ---
BODY OPTIONS DIMENSIONS (mm)
25.3 Max
Panel thickness
Panel cut-out * Flange
2.0
Finish Matt is standard
Cut-outs must be punched in the direction of insertion
A,Q 0.75 to 3.3mm
7.6
Colour Call factory for custom colours.
L,B,T 0.75 to 2.5mm
A
A full range is available for large orders
R 0.75 to 3.0mm
13.2
27.2
For cut-out details
*
30.2
Legend printing Select from the examples
27.3
on momentary switches
9.2
or call factory for custom legends
call the factory
14.0
12.2/12.3
Gloss or Matt Lamp voltage Call factory for details
Blanking plates A0434 - - Dummy units
B
R3.5
to fill unused panel holes
30.0
33.4
30.1
Protective cover (designed to IP65)
Snaps on to A, L, Q or T bodies
14.0
Matt only
11.0/11.1
(add G after body in cat no).
1300 High inrush, positive break switching
This reduces panel thickness by 1mm.
L
The 1300 series mechanism ensures
R1.0
contact welds formed at switch-on,
30.0
32.0
30.1
are positively separated by the
plunger tube acting directly on the
14.0
11.0/11.1
Matt only step in the moving contact.
Q
step plunger tube
R1.6
28.2
30.2
28.3
14.0
11.5/11.6
Gloss or Matt
R
Panel sealing washer W46 is available for
the same body sizes but reduces panel
28.5
31.5
28.6
thickness by a further 0.8mm
Covers are not suitable for momentary types.
17.0
Examples of printing
14.0/14.1 Matt only
Arcshield
T
Hides switching arc
R1.6
28.2
30.2
28.3
For all options call the factory
14.0
11.5/11.6
Matt only
EN602A EN730 EN822
21
tel: +44 (0)20 8979 3232 Arcolectric email: info@arcoswitch.co.uk