5500 Lit Rocker Switches - Single Pole 16A 250Vac 16(4)A 250Vac T85 10(3)A 250Vac T100, (12A 250Vac T125 for P rocker only) UL CSA 15A 250Vac, CSA 16A Non Ind 250Vac UL CSA 250Vac 1hp, 125Vac 1/2hp UL 85C, file E45221, CSA file LR10990 In house test Inrush 24A to EN61058-1 & 20A 28Vdc contact gap Technical data on pages 4 & 5 (switches), 66 (indicators) For Twin units repeat the order details for both the right and left sides C 5503 A L --- TERMINAL FUNCTION ROCKER BODY PRINT, COLOUR, VOLTAGE ETC TERMINAL FUNCTION ROCKER C A Softline (Matt only) Approvals & ratings vary with function 12 3 On Off Switches - ON when pressed over terminal 3 9.1 Lit 6.3 x 0.8 ON - OFF 5500 H 9.1 ON - OFF P Lit window (Matt only) 5503 Lit preferred option Switched neutral 4.8 x 0.8 T ON - OFF 5508 Lit for special 7.0 applications Unswitched neutral 2.1 Solder 22 tel: +44 (0)20 8979 3232 Arcolectric email: info arcoswitch.co.ukC5503AL --- C5500AL --- C5503PL --- C5503A/C5430AL C5503A/C5503AL C5503P/C5503PL BODY OPTIONS DIMENSIONS (mm) 28.6 Max Panel thickness Panel cut-out ** Flange 2.0 Finish Matt is standard Cut-outs must be punched in the direction of insertion 7.6 A,Q 0.75 to 3.3mm L,B,T 0.75 to 2.5mm Colour Call factory for custom colours. A R 0.75 to 3.0mm 9.2 A full range is available for large orders For cut-out details on 27.2 ** 30.2 27.3 13.2 momentary switches Legend printing Select from the examples call the factory or call factory for custom legends 14.0 12.2/12.3 Matt only Terminal spacing - Poles 10.8 between centres (twin units) Lamp voltage Call factory for details B R3.5 30.0 33.4 30.1 Blanking plate A0434 - - (SP) A0494 - - (DP) Dummy units to fill unused panel holes Twin units 14.0 Two single switches or a switch and an indicator light can be 11.0/11.1 Matt only Protective cover (designed to IP65) assembled side by side in one double pole body. L Snaps on to A, L, Q or T bodies For 1500 range panel cut-out details see page 29. R1.0 (add G after body in cat no). For 5500 range panel cut-out details (L, B and T) call factory. 30.0 31.9 30.1 This reduces panel thickness by 1mm. 1 1 4 4 14.0 2 5 11.0/11.1 Matt only 2 5 3 3 6 6 Q R1.6 28.2 30.2 For twin units the first set of order format details refer to the 28.3 left hand unit, when looking at the front of the assembly (This has terminal numbers 1, 2 & 3) 14.0 11.5/11.6 Gloss or Matt R 28.5 31.5 Panel sealing washers W46 (Single Pole) and 28.6 W42 (Double Pole) are available for these 17.0 body types but reduce panel thickness by a Examples of printing 14.0/14.1 Matt only further 0.8mm T R1.6 28.2 30.2 28.3 14.0 11.5/11.6 For all options call the factory Matt only EN3036 EN3064 EN706 23 tel: +44 (0)20 8979 3232 Arcolectric email: info arcoswitch.co.uk