3506 C&K

Tin-plated 3 Max. 89 m /h AC axial fans 92 x 38 mm Material: Housing: Die-cast aluminum Possible special versions: Impeller: painted sheet steel (See page 12) Direction of air flow: Exhaust over struts - Moisture protection Direction of rotation: Clockwise, - Salt spray protection looking towards rotor - Degree of protection: IP 54 / IP 65 Connection: Via 2 single wires grounding lug for M4 x 8 Weight: 420 g Note: Please note our new ACmaxx series. With identical mounting dimensions and voltages, this series achieves greater energy efficiency. See page 189. Series 3000 Nominal data 3 3 -1 m V H d B W r H H Type m /h cfm VAC Hz dB(A) Bel(A) / Watts rpm C Hours Hours 3850 49 28.8 230 50 24 3.7 9.0 1 750 -10...+75 60 000 / 27 500 3856 54 31.8 230 50 26 3.9 9.0 1 950 -40...+90 60 000 / 20 000 3550 67 39.4 230 50 32 4.4 8.5 2 300 -10...+80 60 000 / 25 000 3556 67 39.4 230 50 33 4.5 8.5 2 400 -40...+90 60 000 / 20 000 3650 75 44.1 230 50 36 4.8 12.0 2 650 -10...+55 52 500 / 37 500 3656 75 44.1 230 50 37 4.9 12.0 2 700 -40...+75 52 500 / 22 500 3800 54 31.8 115 60 26 3.9 8.0 1 900 -10...+80 62 500 / 25 000 3806 60 35.3 115 60 29 4.2 8.0 2 150 -40...+95 62 500 / 17 500 3500 73 43.0 115 60 35 4.6 8.0 2 500 -10...+80 62 500 / 25 000 3506 73 43.0 115 60 36 4.7 8.0 2 600 -40...+95 62 500 / 17 500 3600 89 52.4 115 60 41 5.1 11.0 3 100 -10...+65 55 000 / 30 000 3606 89 52.4 115 60 42 5.2 11.0 3 200 -40...+75 55 000 / 25 000 Subject to change Fan type Length Connection wires With sleeve bearings 310 mm long AWG 18, TR 64 With ball bearings 310 mm long AWG 18 Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level L A ISO 103002 W measured on a hemisphere with a radius of 2 m. Sound pressure level L A measured at 1 m distance p from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation For detailed information see