537100000 C&K

C&K Hardware AUXILIARY ACTUATORS Easy to assemble auxiliary actuators for the MM Series provides the end-user with the capability to operate the switch with force not directly in line with the operating button. Actuators are available in either the plain-leaf or roller-leaf style. Each actuator kit consists of the stainless steel spring-leaf with an integral side mounting plate, flexible insulator, two (2) 2-56 x 7/16 roundhead screws, with lockwashers and hex nuts. Actuator and hardware are supplied unassembled. Specially formed auxiliary actuators are available, consult Customer Service Center. LEAF ALS-1 LEAF (Low Motion) ALS-2 LEAF ROLLER AWS-1 L AWS-2 LEAF ROLLER (Low Motion) ITT Industries Cannon www.ittcannon.com L-6 Miscellaneous Components, Hardware & Technical DataMiscellaneous Components, Hardware & Technical Data C&K Hardware AUXILIARY ACTUATORS Basic precision HB Series switches, with any terminal style, can be used with these attachable actuators. As supplied, the actuator is not assembled to the switch the switch must be ordered separately. The actuator can be assembled to the switch before mounting, or the actuator can be mounted on the panel or chassis and the switch installed after wiring. Assembly screws, nuts and lockwashers are furnished. BB-1 SEALED PLUNGER (For use with P0 actuator option.) SEALED PLUNGER (For use with PS sealed actuator option.) BB-2 Actuator assembly sealed to mounting surface by flexible boot and o-ring seal. OVERTRAVEL PLUNGER (For use with P0 actuator option.) BJ-1 BJ-2 OVERTRAVEL PLUNGER (For use with PS sealed actuator option.) L Provides up to .250 in. total travel mounting by threaded bushing or two screws. ITT Industries Cannon www.ittcannon.com L-7