8060 Series
Alternate Action and Momentary Pushbutton Switches
Features/Benefits Typical Applications
A
Long travel Instrumentation
Available with LED Computers and peripherals
Long life contact design Telecommunications and
networking equipment
Epoxy terminal seal
compatabile with bottom
wash cleaning
RoHS compliant models
Models Available
available
Specifications Materials
CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
or 28 V DC; 3 AMPS @ 250 V AC. See page A-59 for
flame retardant (UL 94V-0).
additional ratings.
PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled
ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.
polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.
CONTACT RESISTANCE: Below 20 m typ. initial @
CAP & FRAME: Nylon, black standard.
2-4 V DC, 100 mA, for both silver and gold plated contacts.
BUSHING: Brass or zinc, nickel plated.
9
INSULATION RESISTANCE: 10 min.
HOUSING: Stainless steel.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
OPERATING TEMPERATURE: 30C to 65C
END CONTACTS: Q contact material: Coin silver, silver plated.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
See page A-59 for additional contact materials.
EIA RS-186E method 9 (1 hour steam aging).
CENTER CONTACT & ALL TERMINALS: Q contact material: Copper
CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
alloy, silver plated. See page A-59 for additional contact materials.
TERMINAL SEAL: Epoxy. Refer to soldering and cleaning
NOTE: Any models supplied with P, R, S, Q, B or G contact material are RoHS compliant.
in Technical Data Chapter.
HARDWARE: Nut & Locking Ring: Brass, nickel plated;
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Lockwasher: Steel, nickel plated.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages A-53 thru A-61. For additional options not shown in catalog, consult Customer Service Center. All
models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods.
Switch Function Bushing
8161 SPDT On-On H .300 high, flat, hi torque Contact Material
8168 SPDT On-Mom. H9 .300 high, flat, hi torque B Gold
8261 DPDT On-On NONE No bushing choice required P Gold, matte-tin
Q Silver
Y3 7.6mm, keyway
Actuator or Plunger
S Silver, matte-tin
S .710 high plunger Terminations
G Gold over silver
with .375 dia. cap A Right angle, PC thru-hole
R Gold over silver,
J80 Snap-in AV2 Vertical right angle,
matte-tin
J81 Snap-in with frame PC thru-hole
J82 Snap-in with frame for LED C PC Thru-hole
Seal
J86 Snap-in with frame & LED Z Solder lug
E Epoxy
L .740 high plunger with A3 Right angle, snap-in, PC thru-hole
.395 dia. cap AV3 Vertical right angle, snap-in, I Epoxy potted base
L1 .740 high plunger with PC thru-hole
.590 dia. cap V3 .460 high, V-bracket
Cap Color
S1 .615 high plunger with V4 .630 high, V-bracket
2 Black
.200 dia. cap V6 .460 high, V-bracket
1 White
S2 .710 high plunger with V21 .555 high, snap-in V-bracket
3 Red
.310 dia. cap V31 .460 high, snap-in V-bracket
Frame Color
4 Orange
W .750 long, wire wrap
2 Black
5 Yellow
Z3 Quick connect
9 Gray
LED Color
3 Red
NONE Models without LED
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
29 Aug 18
www.ckswitches.com
A-52
PushbuttonPushbutton
8060 Series
Alternate Action and Momentary Pushbutton Switches
SWITCH FUNCTION
A
SWITCH FUNCTION CONNECTED TERMINALS
POS. 1 POS. 2 POS. 1 POS. 2
NO.
C&K marking this side
C&K marking this side
POLES MODEL NO. SCHEMATIC
8161 ON ON 2-3 2-1
SP
8168 ON MOM. 2-3 2-1
SPDT
SPDT
Terminal Nos.
Part number shown: 8161SHZQE
For Reference Only
DP ON ON 2-3,5-6 2-1,5-4
8261
DPDT
DPDT
Terminal Nos.
Part number shown: 8261SHZQE
For Reference Only
MOM. = Momentary All models with all options when ordered with G or Q contact material.
CAP COLOR
ACTUATORSNAP-IN FRONT MOUNT
ACTUATOR OR PLUNGER
J80 SNAP-IN
PANEL MOUNTING
*
OPTION
CODE CAP COLOR
2 BLACK
1 WHITE
3 RED
*Increase this dimension to
4 ORANGE .620/.625 (15,75/15,88)
for .091/.125 (2,41/2,18)
5 YELLOW
thick panels.
9 GRAY
J81 SNAP-IN WITH BLACK FRAME PPANEL ANEL MOUNTINGMOUNTING
Cap Finish: matte.
Other colors available, consult
Customer Service Center.
Available with C, W, Z or
Z3 terminations.
NOTE: Caps & frames available
separately, see pages A-60 and A-61.
**
*Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,41/2,18)
Third Angle
thick panels.
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
29 Aug 18
www.ckswitches.com
A-53