Toggle
9000 Series
Power Toggle Switches
Features/Benefits Typical Applications
Power ratings up to 10 AMPS Shut-off switch
Double pole models Small equipment
Locking lever options available
Wide variety of actuator styles
RoHS compliant and compatible
UL 61058-1
Specifications Materials
CONTACT RATING: CASE: Diallyl phthalate (DAP) (UL 94V-0).
9201 Model ACTUATOR: Brass, chrome plated.
GP (general purpose) BUSHING: Brass or zinc, nickel plated.
6 AMPS 125 VAC 50/60 Hz T85 10,000 cycles (10E3)
HOUSING: Stainless steel.
3 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
SWITCH SUPPORT: Brass or steel, matte-tin plated.
R (resistive)
END CONTACTS: 9201 Model: Coin silver, silver plated.
6 AMPS 30 VDC T85 10,000 cycles 9221 Model: Silver cadmium oxide.
9221 Model: CENTER CONTACTS: Copper alloy, silver plated
GP (general purpose)
ALL TERMINALS: 9201 Model: Copper alloy, silver plated.
10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles 9221 Model: Copper alloy, matte-tin plated.
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles TERMINAL SEAL: Epoxy.
R (resistive) HARDWARE: Nut & Locking ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
10 AMPS 30 VDC T85 10,000 cycles
ELECTRICAL LIFE: 25,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m typ. initial @
NOTE: Any models supplied with Q contact material are RoHS compliant and compatible.
2-4 V DC, 100 mA.
NOTE: Specifications and materials listed above are for switches with standard options.
9
INSULATION RESISTANCE: 10 min.
For information on specific and custom switches, consult Customer Service Center.
DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: 30C to 85C.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F-43 thru F-47. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
9201 DPDT, On-On, 6 Amps
9221 DPDT, On-On, 10 Amps
Actuator
S Antirotation, .410" high
Bushing
K Locking lever, .650" high
H3 .296" high, keyway
K1 Locking lever, .680" high
CW Splashproof
L43 Lever handle with cap
H .296" high, flat
P3 Flatted, anti-rotation, .450" high
T .687" high, 15/32 bushing
Terminations
T1 .460" high, 15/32 bushing
Z Solder lug
Z4 Quick connect
Contact Material
(9221 only)
Q Silver
AV2 Vert. right angle, PC thru-hole
Seal
(9201 only)
E Epoxy
C PC Thru-hole
D No epoxy
F
Actuator Color/Finish
NONE Bright chrome
Bushing Finish
2 Black
NONE Nickel
2 Black
KXX Actuator Color/Finish
NONE Natural aluminum
Dimensions are shown: Inches (mm)
2 Black anodized aluminum
Specifications and dimensions subject to change
www.ck-components.com
F43
9000 Series
Power Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION CONNECTED TERMINALS
POS. 1 POS. 2 POS. 1 POS. 2
NO.
POLES MODEL NO. RATING* SCHEMATIC
9201 6 AMPS ON ON
DP 2-3,5-6 2-1,5-4
DPDT
9221 10 AMPS ON ON
DPDT
1/4 40 UNS-2A
Part number shown: 9201SH3ZQE
Terminal Nos.
Molded On Side Of Case
* See CONTACT MATERIAL, page F-47, for complete ratings.
All 9000 Series models meet international dimensional and electrical requirements.
9221 model must be ordered with Z4 terminations and D seal option.
ACTUATOR FINISH
ACTUATOR
ACTUATOR
S ANTIROTATION, .410" HIGH P3 FLATTED, ANTIROTATION, .450" HIGH
OPTION
CODE ACTUATOR FINISH
NONE NATURAL ALUMINUMWith Nickel Plated Bushing
2 BLACK
NOTE: Black hardware is supplied when either black actuators or bushings
are specified. All hardware is available separately, see Section N.
Antirotation is standard on all actuators, provides anti-push-in feature
on actuator.
Dress nut part number: 709901201 supplied standard with P3 actuator.
T .687" HIGH, 15/32 BUSHING T1 .460" HIGH, 15/32 BUSHING
OPTION
CODE ACTUATOR FINISH
NONE BRIGHT CHROMEWith Nickel Plated Bushing
2 BLACK
15/32-32 UNS-2A
15/32-32 UNS-2A
NOTE: Bushing option code not required for T & T1 actuators unless CW
splashproof bushing ordered.
F
Black hardware is supplied when either black actuators or bushings are
specified. All hardware is available separately, see Section N.
Antirotation is standard on all actuators except T & T1, provides anti-push-in
feature on actuator.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
F44
Toggle