APB Series Backlit Pushbutton Switch Features/Benefits Typical Applications IP67 sealed Harsh environments A 1,000,000 life cycle Off-Road Illumination Industrial Threaded or snap-in mounting Medical RoHS compliant Transportation Joystick control modules Gaming Military Specifications Materials HOUSING: PBT FUNCTION: SPST Momentary BASE: PBT CONTACT ARRANGEMENT: N.O. CAP: Painted polycarbonate MOUNTING TYPE: Snap-in (no panel seal) ACTUATOR: Threaded body (hex nut, lock washer, and panel seal gasket provided) Illuminated: Clear polycarbonate Torque spec for threaded body: Do not exceed 8-9 in-lbs (0.9-1.0 N.m) INTERNAL SEAL: Silicone rubber TERMINALS: Copper alloy, gold over silver plating Mechanical MOVABLE CONTACT: Copper alloy, gold over silver plating OPERATING LIFE: 1,000,000 cycles TERMINAL SEAL: Epoxy TOTAL TRAVEL: 2.1 0.2 mm WIRE LEADS: UL1569 Black 22 AWG OPERATING POINT 1.55 0.25 mm OVER TRAVEL: 0.6 min. Operating Environment OPERATING FORCE: 4N 1N standard configuration other force OPERATING TEMPERATURE: -40C to 85C option 2N 0.5N VIBRATION: 10-500 Hz 10g Max ESD PROTECTION: 20 KV min. SHOCK: 60g 11ms sawtooth wave Process Environment Electrical CONTACT RATING: SEALING: IP67 for threaded body 200mA 24 V DC resistive (500,000 cycles) IP65 for snap-in version (no panel seal) 100mA 50 V DC resistive (500,000 cycles) 400mA 32 V AC resistive (500,000 cycles) NOTE: Specifications and materials listed above are for switches with standard options. 125mA 125 V AC resistive (1,000,000 cycles) For information on specific and custom switches, please contact Customer Service. DIELECTRIC STRENGTH: 1000 V AC min. INSULATION RESISTANCE: 1 G 500 VDC INITIAL CONTACT RESISTANCE 50 m max (without wire leads) BOUNCE TIME: <5 ms Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. A P B E B E Designation APB APB Series Cap Symbol Operating Force 000 Painted black over 2 2 Newtons white without symbol* 4 4 Newtons Cap 001 Plus E Extended Dome (600E) 002 Locked Terminal Seal 003 Engine stop E Epoxy Illumination 004 Park brake release 01 Super White 005 Engine start 07 Super Blue 006 Fast Contact Material 007 Slow B Gold Bushing Style 008 Unlocked S Snap-in plastic 009 Rock shaft lower T Threaded plastic 010 Minus Termination Z Solder Lug * cap painted black over white to W 12 Wire Leads 22 AWG allow customer laser etching Dimensions are shown: Inches (mm) 28 Jul 21 Specifications and dimensions subject to change www.ckswitches.com A-114 PushbuttonPushbutton APB Series Backlit Pushbutton Switch A 2X 7,5 2X 1,81 .295 .071 2X 4 .157 27,95 REF 1.100 7,6 12,35 20,35 .486 .299 .801 17,4 .685 5,7 .224 DOWN POSITION SNAP-IN 1,5 .059 3 M13 X 1.25-6g THREADED 2 1 4 0,85 SEE SCHEMATIC .033 ELECTRICAL SCHEMATIC PANEL CUTOUT 34 A 12 B SPST-NO-DB PANEL THICKNESS DIM A ( 0.05 MM) DIM B ( 0.05 MM) 1 MM 13.70 MM 13.00 MM 0.039 IN 0.539 IN 0.512 IN 2 MM 13.80 MM 13.00 MM 0.079 IN 0.539 IN 0.512 IN 3 MM 13.90 MM 13.10 MM 0.118 IN 0.547 IN 0.516 IN THREADED BODY 13.70 MM 13.00 MM MIN PANEL THICKNESS 1 MM 0.539 IN 0.512 IN A 0.1 MM MIN CHAMFER ON THE LEADING EDGE OF MOUNTING HOLE IS RECOMMENDED FOR SNAP-IN VERSION. Third Angle Projection Dimensions are shown: Inches (mm) 28 Jul 21 Specifications and dimensions subject to change www.ckswitches.com A-115