LC Series Small Size Precision Snap-acting Switches Features/Benefits Typical Applications Compact design Motorized equipment Long life and high electrical capacity Sump pump Quick connect, wire lead or PC mounting Thermostatic controls Wide variety of actuator styles UL61058-1 Specifications Materials CONTACT RATING: From low level* to 10.1 AMPS 250 V AC. SWITCH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 94V-0). ELECTRICAL LIFE: 100,000 cycles ACTUATOR BUTTON: Thermoplastic polyester (UL 94V-0). INSULATION RESISTANCE: 1,000 M ohm min. SPRING: Copper alloy. DIELECTRIC STRENGTH: 1,000 Vrms min. sea level. PIVOT: Copper alloy. OPERATING TEMPERATURE: 17F to 185F (25C to 85C). MOVABLE CONTACTS: Fine silver for ratings greater than 1 AMP OPERATING FORCE: From 142 to 170 grams at actuator button. 125 V AC. Fine silver with 24K gold plate for 1 AMP Forces are less at free end of lever actuators (see OPERATING 125 V AC or less. FORCE and ACTUATOR option sections). STATIONARY CONTACTS: Fine silver welded on copper alloy for MOUNTING: 2-56 screws, torque 2.3 in/lbs max. ratings greater than 1 AMP 125 V AC. Gold alloy welded * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. on copper alloy for ratings less than 1 AMP 125 V AC. 20 V AC or DC max. TERMINALS: Copper alloy. J NOTE: Specifications and materials listed above are for switches with standard options. TERMINAL SEAL: Epoxy. For information on specific and custom switches, consult Customer Service center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. For additional options not shown in catalog, consult Customer Service Center. L C Series LC SP, Mom. Operating Force GG 5 oz./142 grams GD 3.3 oz./94 grams GH 6 oz./170 grams Electrical Rating X1 UL 61058-1 (see chart) V6 UL 61058-1 (see chart) Actuator V7 UL 61058-1 (see chart) P00 Pin plunger A10 .28 lever roller, high force Terminations F5 UL 1054 (see chart) A15 .51 lever roller, high force E Solder L9 UL 1054 (see chart) A20 .39 lever roller, low force H .110 quick connect M1 UL 1054 (see chart) A25 .61 lever roller, low force J Wire lead T10 .29 lever, high force L Left formed PC thru-hole T13 .22 simulated roller, high force R Right formed PC thru-hole T15 .57 lever, high force S PC Thru-hole T20 .38 lever, low force T23 .32 simulated roller, low force Circuitry T25 .67 lever, low force C SPDT W SPST N.C. Electrical Life Y SPST N.O. NONE 6,000 operations U* Extended 100,000 operations * Extended operations only available on Electrical Rating options F5, L9 and M1 Seal NONE (STD.) No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com J36 Snap-actingSnap-acting LC Series Small Size Precision Snap-acting Switches SERIES LCSMALL SIZE PRECISION SNAP-ACTING SWITCHES SP MOMENTARY 0.297 (7,54) OPERATING FORCE J BASICSWITCH OPERATING FORCES OPTION CODE (OZ./GRAMS) 5 GG 142 3.3 GD 94 6 GH 170 NOTE: Operating force varies with actuator option, see ACTUATOR option section. ELECTRICAL RATING UL 61058-1 CONTACT MATERIAL MOVABLE STATIONARY RoHS RoHS OPTION CODE ELECTRICAL RATING CONTACT CONTACT COMPLIANT* COMPATIBLE* Fine silver with Fine silver with 24K gold 1A GP, 250 Vac, 50/60 Hz, 25E3, T85 X1 24K plate on copper base Yes Yes 1RA, 30 Vdc, 1E4, T85 gold plate alloy 5(2)A RM, 250 Vac, 50/60 Hz, 1E4, T85 5A GP, 250 Vac, 50/60 Hz, 1E4, T85 Fine silver welded on Fine silver Yes Yes V6 5RA, 30 Vdc, 1E4, T85 copper base alloy 1/3 HP, 125/250 Vac, 50/60 Hz, 1E4, T85 10(2)A RM, 250 Vac, 50/60 Hz, 1E4, T85 10A GP, 250 Vac, 50/60 Hz, 1E4, T85 Fine silver welded on Fine silver Yes Yes V7 10RA, 30 Vdc, 1E4, T85 copper base alloy 1/3 HP, 125/250 Vac, 50/60 Hz, 1E4, T85 UL 1054 CONTACT MATERIAL MOVABLE STATIONARY RoHS RoHS OPTION CODE ELECTRICAL RATING CONTACT CONTACT COMPLIANT* COMPATIBLE* Fine silver with Fine silver with 24K gold 1A, 125 V AC, 30 VDC 24K plate on copper base Yes Yes F5 100,000 cycles (U option) gold plate alloy 5A, 1/3 HP 125 and 250 V AC Fine silver welded on L9 Fine silver Yes Yes 100,000 cycles (U option) copper base alloy 10.1A, 1/3 HP 125 and 250 V AC Fine silver welded on Fine silver Yes Yes M1 100,000 cycles (U option) copper base alloy * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. Consult Customer Service Center for availability and delivery of nonstandard ratings. *Low Level = conditions where no arcing occurs during switching, i.e., 0.4 VA max. 20 V AC or DC max. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com J37