R Series ROTA-SLIDE Rotary Switches Features/Benefits Typical Applications Multi-pole and multi-position Ceiling fans Industrial equipment Positive detent Portable tools Panel and PCB mounting Enclosed RoHS Compliant Models Available Specifications Materials CONTACT RATING: Q contact material: 5 AMPS 125 V AC HOUSING & BUSHING: 6/6 nylon (UL 94V-2). 2.5 AMPS 250 V AC 0.5 AMP 125 V DC 1/8 HP 125 ACTUATOR: 6/6 nylon (UL 94V-2). and 250 VAC (UL/CSA). CONTACTS & TERMINALS: Q contact material: Copper, silver plated. See page K-20 for additional ratings. See page K-20 for additional contact materials. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT SPRING: Music wire or stainless steel. CONTACT RESISTANCE: Below 10 m typ. initial 2-4 V DC, MOUNTING NUT: Steel, zinc plated. 100 mA, for both silver and gold plated contacts. TERMINAL SEAL: Epoxy. 9 INSULATION RESISTANCE: 10 min. NOTE: Any models supplied with Q or B contact material are RoHS compliant. DIELECTRIC STRENGTH: 1,000 Vrms min. sea level. INDEXING: 36-one contact models, 10 position max. two contact NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Custome Service Center. models, 5 position max. OPERATING & STORAGE TEMPERATURE: -30C to 95C Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-19 and K-20. For additional options not shown in catalog, consult Customer Service Center. K Switch Function R100 SP, 36 Index, 10 pos. no stops R103 SP, 36 Index, 3 pos. R104 SP, 36 Index, 4 pos. Actuator R108 SP, 36 Index, 8 pos. 07 .500 high with .156 flat R203 DP, 36 Index, 3 pos. 05 .375 high with .156 flat R204 DP, 36 Index, 4 pos. 15 Screwdriver slot without bushing R205 DP, 36 Index, 5 pos. Mounting Style RR 3/8-32 threaded bushing RN PC without bushing RS PC without bushing Terminations 03 Solder lug with hole Contact Material 01 Solder lug with notch Q Silver 02 PC Thru-hole B Gold WC Wire Lead Seal NONENo seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com K18 RotaryRotary R Series ROTA-SLIDE Rotary Switches SWITCH FUNCTION SP MODELS 36 INDEXING SP MODELS 36 INDEXING DP MODELS 36 INDEXING SCHEMATIC NO. MODEL SWITCH NO. MODEL SWITCH TERMINALS TERMINALS POLES NO. FUNCTION POLES NO. FUNCTION 10 Position R100 All Terminals No Stops R203 3 Position 10-1-2-3,5-6-7-8 R103 3 Position 10-1-2-3 DP 4 Position All Terminals R204 SP 4 Position 10-1-2-3-4 R104 5 Position All Terminals R205 R108 8 Position 10-1-2-3-4-5-6-7-8 All models with all options when DP MODELS 36 INDEXING SCHEMATIC ordered with Q contact material. NOTE: Break-before-make contacts. Actuators and contacts are shown in position 1. No common terminal is present. Switching function is provided by movable contacts shorting adjacent pairs of stationary contacts. K Part number show: R10007RR03Q ACTUATOR 07.50019 HIGH WITH .156 FLAT 05.37519 HIGH WITH .156 FLAT 15SCREWDRIVER SLOT Shown with RR mounting style. Shown with RN mounting style. Arrow on actuator marked red (std.). For mounting styles without bushing, Shown with RS mounting style. add .250 (6,35) to actuator length. Third Angle Projection Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com K19