T Series Subminiature Toggle Switches Features/Benefits Typical Applications Compact sizesmall footprint Hand-held telecommunications Single and double pole models Instrumentation PC and panel mount Medical equipment options available RoHS compliant models available Models Available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. 20 V AC or CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or DC max. Q contact material (TX01 models): 3 AMPS diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame 120 V AC or 28 V DC. All other models: 2 AMPS retardant, heat stabilized. 120 V AC or 28 V DC. See page F-37 for additional ratings. ACTUATOR: Brass, chrome plated. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break BUSHING: Brass, nickel plated. cycles at full load. All other models: 30,000 cycles. HOUSING: Stainless steel. CONTACT RESISTANCE: Below 20 m typ. initial SWITCH SUPPORT: Brass, matte-tin plated. 2-4 V DC, 100 mA, for both silver and gold plated contacts. END CONTACTS: B contact material: Copper alloy, with gold plate 9 INSULATION RESISTANCE: 10 min. over nickel plate. Q contact material: Coin silver, silver plated. DIELECTRIC STRENGTH: 1000 Vrms min. sea level. See above for additional contact materials. OPERATING TEMPERATURE: 30C to 85C. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, SOLDERABILITY: Per MIL-STD-202F method 208D, or with gold plate over nickel plate. Q contact material: Copper alloy, EIA RS-186E method 9 (1 hour steam aging). silver plated. See page F-42 for additional contact materials. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant and compatible. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Additional hardware available NOTE: Specifications and materials listed above are for switches with standard options. separately, see Section N. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-33 thru F-37. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function T101 SPDT On-None-On T102 SPDT Off-None-On Actuator T103 SPDT On-Off-On P3 Flatted, T105 SPDT Mom.-Off-Mom. Bushing anti-rotation, H .220 high, threaded, flat T107 SPDT On-Off-Mom490 high Terminations Seal T108 SPDT On-None-Mom. S .370 high H9 .220 high, unthreaded, flat A Right angle, PC thru-hole E Epoxy CF Splashproof, .310 high, threaded, flat T201 DPDT On-None-On K Locking lever, round tip AV Vertical right angle, T203 DPDT On-Off-On L1 .640 high D9 .260 high, unthreaded, keyway PC thru-hole T205 DPDT Mom.-Off-Mom. T .310 high, threaded, flat M1 .220 high C PC Thru-hole T9 .310 high, unthreaded, flat T207 DPDT On-Off-Mom. S1 .410 high V3 Vertical mount V-bracket T208 DPDT On-None-Mom. M .210 high TD .260 high, threaded, keyway Z Solder lug TK .310 high, threaded, keyway T211 DPDT On-On-On. L .290 high W Wire wrap Y .220 high, threaded, keyway Contact Material Y9 .220 high, unthreaded, keyway B Gold P Gold, matte tin Q Silver F G Gold over silver R Gold over silver, matte-tin Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com F32 ToggleToggle T Series Subminiature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS.1 POS. 2 POS. 3 NO. MODEL C&K marking on opposite side C&K marking on opposite side POLES NO. SCHEMATIC T101 ON NONEON 2-3 N/A 2-1 T103 ON OFF ON T105 MOM. OFF MOM. 2-3 OPEN 2-1 SP T107 ON OFF MOM. SPDT T108 ON NONE MOM. 2-3 NA 2-1 SPST T102 OFF NONEON OPEN N/A 3-1 SPDT .338 (8,57) Part number shown: T101SHZQE SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS.1 POS. 2 POS. 3 NO. MODEL POLES NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC T201 ON NONEON 2-3,5-6 N/A 2-1,5-4 T203 ON OFF ON 2-3,5-6 OPEN 2-1,5-4 DP T205 MOM. OFF MOM. T208 ON NONE MOM. 2-3,5-6 N/A 2-1,5-4 ON ON ON. 2-3,5-6 2-3,5-4 2-1,5-4 T211* DPDT DPDT .338 (8,57) Terminal Nos. Part number shown: T201SHZQE For Reference Only F MOM. = Momentary * Wiring for 3-way switch refer to page N-10 All models with all options when ordered with G, L, R or Q contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com F33