MP725 Surface Mount Power Film Resistors D-Pak Style Surface Mount Power Package including Metal Tab - 0.020 ohm to 1.00 Kohm Use your thermal design experience with power semiconductors in D-Pak style power packages. This experience will help you get the most out of this unique family of surface mount power resistors. The thermal design issues are the same where power handling capability is based on the case temperature which is maintained in your design. MP725 Surface Mount Power Film Resistors introduce our proven Micronox resistance film system in the widely accepted D-Pak style surface mount power package. The non-inductive design makes this resistor ideal in high frequency communications, power switching circuits, and snubbers. The special performance features of our patented MP725 Surface Mount Power Film Resistors include: D-Pak style power package for surface mount applications. Metal tab assists in post surface mount soldering inspection. Specifications: Resistance values to 0.020 ohm for current sense applications. Resistance Tolerance: 1% for 0.050 up to Non-Inductive Design. 1.00K, 5% for 0.020 up to 0.049 (5% and Up to 25 Watt power rating at +25C case temperature. 20% are available for most resistance values). Resistor element is electrically isolated from the metal heat sink tab. Temperature Coefficient: TC referenced to +25C, R taken at +150C Resistance 0.50 ohm and above, -20 to +80 ppm/C Power Dielect. Strength Max. Model No. Terminal Rating V AC Voltage RMS Max. Min. 0.050 ohm to 0.49 ohm, 0 to +200 ppm/C 0.020 ohm to 0.049 ohm, 0 to +300 ppm/C MP725 25 Watts 1,500 200 1.00K Solderable 0.020 * Thermal Shock: Mil-Std-202, Method 107, Cond. F, R (0.5 percent + 0.0005 ohm) max. DERATING CURVE The case temperature is to be used for purposes of * 100 establishing the maximum applied power. See Derating Momentary Overload: 1.5 times rated power Curve. The case temperature measurement is made on the with applied voltage not to exceed 1.5 times 80 metal mounting tab against the molded body. Derate maximum continuous operating voltage for 5 60 appropriately for the ambient temperature range, the thermal seconds, R (0.5 percent + 0.0005 ohm) max. resistance of the mounting surface, and the temperature 40 limitations of the adjacent materials (such as glass epoxy). Load Life: 2,000 hours at rated power, R (1.0 20 Derating ( thermal resistance ) is 0.200 W/C ( 5.0C/W ). percent + 0.0005 ohm). Power rating dependent upon case temperature. See derating curve. 0 Power dissipation is 2.5 watts, at an ambient temperature of 25 100 150 25C, when mounted on a double sided copper board (2 ounce, Moisture Resistance: Mil-Std-202, Method 106, CASE TEMPERATURE, C G-10 or FR-4) 1 inch x 1 inch x .063 inch (thick). R (0.5 percent + 0.0005 ohm) max. Shock: 100G, Mil-Std-202, Method 213, Standard Resistance Values: Cond. I, R (0.4 percent + 0.0005 ohm) max. 0.020 0.25 3.00 25.0 150 Custom resistance values can be Vibration, High Frequency: Mil-Std-202, 0.025 0.30 3.30 27.0 200 manufactured for high quantity Method 204, Cond. D, R (0.4 percent 0.030 0.33 4.00 30.0 250 applications. Please contact Caddock + 0.0005 ohm) max. 0.033 0.40 5.00 33.0 300 Applications Engineering. 0.040 0.50 7.50 40.0 330 Terminal Strength: Mil-Std-202, Method 211, Measurement Note: 0.050 0.75 8.00 47.0 400 Cond. A (Pull Test) 5 lbs., R (0.2 percent For the specifications, resistance 0.075 1.00 10.0 50.0 470 + 0.0005 ohm) max. measurement shall be made at the 0.10 1.50 12.0 56.0 500 Insulation Resistance: 10,000 Megohms min. foot of surface mount formed terminal. 0.15 2.00 15.0 75.0 560 The resistor is electrically isolated from the metal tab. 0.20 2.50 20.0 100 750 FOOTPRINT FOR DWV: The dielectric strength rating of 120 1.00 K SOLDERABLE CONTACT AREA 1500 V AC is based upon connections made rms .310 (7.87) between terminals shorted and either the metal PACKAGE DIMENSIONS surface the part is mounted to or a metal clip in .320 .010 .110 .010 .335 contact with the top surface of the part. (8.13 .26) (2.79 .26) (8.51) Scale: .040 .018 .250 Packaging Note: (1.02 .46) .032 .003 (6.35) 1.5X (.81 .08) Quantities of 250 pieces or greater will be .275 .070 (6.99) (1.78) supplied in tape and reel packaging. The full reel .325 .020 MP 725 Heat sink (8.26 .51) 10.0 height .150 quantity is 1250 pieces. 1% (3.81) .053 .007 .160 .010 (1.35 .18) .100 .100 (4.06 .26) .030 .004 (2.54) (2.54) Ordering Information: (.76 .10) .200 .010 .070 .010 .065 .065 (5.08 .26) (1.78 .26) (1.65) (1.65) .058 .007 MP725 - 10.0 - 1% (1.47 .18) .025 .004 Soldering Note: During surface mount Model Number: (.64 .10) soldering the soldering temperature profile Tolerance Resistor Value: must not cause the metal tab of this Dimensions in inches and (millimeters) device to exceed 220C. Sales and Applications Engineering 17271 North Umpqua Hwy. ELECTRONICS, INC. Roseburg, Oregon 97470-9422 e-mail: caddock caddock.com web: www.caddock.com Phone: (541) 496-0700 For Caddock Distributors listed by country see caddock.com/contact/dist.html Fax: (541) 496-0408 2003-2017 Caddock Electronics, Inc. 28 IL101.0717 RATED LOAD, %X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Thick Film Resistors - SMD category: Click to view products by Caddock manufacturer: Other Similar products are found below : CRCW04028R20JNEE CRCW06036K80FKEE CRG1206F1K58 CRL0603-FW-R700ELF M55342K06B6E19RWL RC1005F1072CS RC1005F471CS RC1005F4751CS RCP0603W100RGED ERJ-1GMF1R00C ERJ-1GMF1R20C ERJ-1GMF2R55C ERJ-1GMF8R66C 25121WF1003T4E 25.501.3653.0 290-1.0M-RC 292-1.0M-RC 292-2.2K-RC 292-4.7K-RC 25121WF4700T4E 292-470K-RC 302-1.0M- RC CPG1206F10KC CRCW02011R00FXED CRCW060315K0FKEE CRCW060320K5FKEE CRG0201F10K RCP2512B100RGWB RCWP12061K00FKS2 3520510RJT 352075KJT RMC16-102JT RMC1JPTE TR0603MR-075K1L 5-2176094-4 35202K7JT WF06Q1000FTL ERJ-S14J4R7U CHP2512L4R30GNT WR12X1621FTL RCWP11001K00FKS3 LRC-LRF3W-01-R050-FTR1800 9- 2176088-6 NRC06F1002TR20F CRCW02013M30FNED CRCW060343K0FKEE WR04X5360FTL RCA060345K3FKEA LTR100JZPF33R0 5-2176091-5