CT2700 Cal Test

CT2700 Datasheet 40 kV High Voltage DMM Probe Overview: The CT2700 High Voltage DMM Probe allows a standard digit multimeter to measure voltages up to 40 kV or 28 kV AC. With a divider ratio of 1,000 to 1, a voltage of 1,000 V will read 1 V on the meter. Output is through 4 mm sheathed banana plugs. Minimum meter input impedance is 10 M. Features: Measures up to: 40 kV (DC + AC peak) or 28 kVrms AC. Voltage dividing of 1000:1 Accuracy: 1% to 20 kV DC Retractable sleeve 4 mm banana plugs Meets IEC 61010-1 CATI Technical data subject to change. Cal Test Electronics 2017. caltestelectronics.comSpecifications All specifications apply to the unit after a temperature stabilization time of 15 minutes over an ambient temperature range of 25 C 5 C. Electrical Specifications Maximum Input Voltage (CAT I) 40 kV (DC+Peak AC) 28 kVrms AC Division Ratio 1000:1 Bandwidth 300 Hz (-3 dB) Temperature Coefficient 200 ppm/C Input Resistance 1000 M DC Volts Accuracy 1% (<20 kV) 3% (20 kV to 40 kV) 0.5% (with 10 M input impedance DMM only) AC Volts Accuracy 5% at 60 Hz (1 to 28 kV) Maximum Loading Current 40 A (at 40 kV DC) Maximum Loading Power 1.6 W Source Impedance 10 M Mechanical Characteristics Dimensions (Lenth x Diameter) 340 x 80 mm Cable Length 3.3 ft (1 m) Weight 0.66 lbs (300 g) Environmental Characteristics Designed for Use in Pollution Degree 2 Operating Environment 32F to 122F (0C to 50C) Storage Temperature -4F to 158F (-20C to 70C) Humidity 80% relative humidity at 104F (40C) Safety Specifications IEC 61010-031 CAT I Specifications are subject to change without notice. To ensure the most current version of this manual, please download the current version from our website: caltestelectronics.com. Technical data subject to change. Cal Test Electronics 2017. caltestelectronics.com