High Current Test Leads, 60A, 200cm w/ Spade Lugs CT4043-200 Features: Current rating: 60 A Max Molded housing material: PVC Lead wire: Silicone jacket over 8 AWG, 19/0.12mm tinned annealed copper Spade connector: Tinned copper, 8.4 mm opening, 1.8 mm thick UL 94 V-2 rated, flame retardant, mesh braided sleeve RoHS 2 compliant Description: The CT4043-200 is a High Current Assembly for power supplies, loads, or battery analyzer test connections. On each end there are heavy duty spade connectors with 8 mm openings to lock tight onto your binding posts or terminals. The test leads are capable of carrying up to 60 A through their 2 meter length. Keeping the black and red leads bound together is a flame retardant mesh sleeve. On both sides of the sleeve there is at least 10 cm of unbound black and red cable giving you freedom from even the most awkward connections. The CT4043-200 is made of highly flexible silicone jacketed lead wires. The conductors are 19 strands of copper wire contributing to the very flexible and supple feel. Specifications and appearance subject to change without notice D404300 060120 1 - www.caltestelectronics.comContact Info: Order Information: Toll Free: 800-572-1028 (US Only) CT4043-200 Phone: 714-221-9330 High Current Test Leads, 60A, 200cm w/ Spade Lugs Fax: 714-921-9849 22820 Savi Ranch Parkway Yorba Linda, CA 92887-4610 USA www.caltestelectronics.com Measurement Drawing: (dimensions in mm inches , not to scale) DIM A CABLE LENGTH (cm) +.39 +.39 3.94 3.94 -.39 -.39 1.83 10 10 46.5 + + 100 100 .92 10 10 - - .66 BLACK 23.4 BLACK 16.7 .88 22 .59 15.0 MESH BRAID, +.02 .33 BLACK -.00 RED RED 0.5 + 8.4 -0.1 Copyright 2020, Cal Test Electronics, Inc. All rights reserved. Information in this publication supersedes that in all previously published material. Trade names referenced are the service marks, trademarks or registered trademarks of their respective companies. Specifications and appearance subject to change without notice D404300 060120 2 - www.caltestelectronics.com