F20B14505ACFA06E Cantherm

Thermal motor protector Temperature limiter Thermal cut-out 13 20 23 Applications - Motors - Transformers - Coils - Electronics, sensors Benefits - Small dimensions - Shock and vibration tested - Leadframe version - Tested for audio, video applications (EN 60065)Technical data control type 1) F20A / E F13A F23A / E F20B / G ratings version normally closed normally open rated current at 250 V 50/60 Hz ( power factor 0.95 / 0.6 ) 2.0 A / 1.6 A 3.0 A / 2.5 A 3.0 A / 3.0 A 2.0 A / 1.6 A switching cycles under rated current 7,000 10,000 10,000 7,000 max. current under failure condition at 250 V 50/60 Hz ( power factor 0.95 ) 4.0 A 5.0 A 4.0 A switching cycles under max. current 3,000 temperature rating T ( steps in 5 K ) 70 C ... 190 C 70 C ... 185 C a tolerances standard: 5 K feature of automatic action 1.B, 2.B.M, 1.C 2.B, 1.C contact resistance ( incl. wire of 100 mm ) < 50 m 2) hysteresis 30 K 15 K dielectric strength ( standard insulation ) 2 kV 2 2 shock / vibration testing ( similar to EN 50155 ) 400 m/s sine half wave / 100 m/s 5 Hz ... 2,000 Hz sine resistances to impregnation tight against ordinary resins and lacquers degrees of protection provided by enclosures ( EN 60529 ) IP00 suitable for use in protection category I, II VDE / ENEC EN 60730-1 / -2-9 UL UL File Number E46827 approvals cUL 1) C22.2 No. 77 / C22.2 No. 24 3) CQC GB14536.1-1998 / GB14536.10-1996 1) 3) 2) details on request at the T (upper and lower) limits the hysteresis could deviate different power rating a Standard wire ( length 100 10 mm, stripped 6 1 mm ) operating Cantherm Cantherm temperature diameter cross section UL voltage 1) lead code max. insulation diameter style max. 2 black ACFA 1.57 mm AWG24 / 0.24 mm 150 C 300 V 3266/3398 2 yellow AEFC 1.80 mm AWG20 / 0.48 mm 2 black KCFA 1.2 mm AWG24 / 0.25 mm 200 C 600 V 10086 2 black KEFA 1.6 mm AWG20 / 0.50 mm 2) 150 C 300 V 3266/3398 black ASFA 1.65 mm AWG20 / 0.81 mm white DCFB 1.21 mm AWG24 / 0.51 mm 200 C 300 V 1180 white DEFB 1.51 mm AWG20 / 0.81 mm 1) 2) AWG24 is recommended Solid Wire Note: Additional wires available upon request.