PIN SP-1A Capital Advanced Technologies

Bulletin SP1A-100 SIP PIN SP-1A SP-1A-R1000 1000 PIECE ROLL Now available in rolls of 1000 pieces these are the same SIP Pins used on our breadboard and adaptor products. When placed on boards of .031 in. thickness spring tension holds the pin in position for soldering. The entire pin and board pads are then fluxed and soldered by wave or dip method. For wave soldering fixtures may be needed to hold the assemblies in the proper position. After soldering the header is removed by shearing with lead shears or other suitable methods. DIM in. mm A .162 / 4.11 B .068 / 1.72 C .024 / .609 D .410 / 10.41 E .010 / .254 F .080 / 2.03 G .100 / 2.54 TOLERANCES / DECIMAL SPROCKET HOLES: .062 XX +/- .01 NOTE: ACCUMULATION OVER 10 LEADS (G) NOT XXX +/- .005 TO EXCEED .010 XXXX +/- .0002 MATERIAL: Pre-Tin Plated Half Hard Phosphor Bronze .010 In. Thick RoHS Compliant PACKAGE: Rolls of 1000 pieces with paper interleaf. Copyright 2008 by Capital Advanced Technologies, Inc. All Rights Reserved. Availability, specifications, and prices are subject to change without notice. All information given is believed to be accurate but is not guaranteed. The user of information given or products represented by such information is responsible for determining the suitability of said information or products for a given purpose. No permission is granted or implied regarding the use of intellectual property or patents owned by Capital Advanced Technologies, Inc. or others by the provision of information or products herein. CAPITAL ADVANCED TECHNOLOGIES, INC. Carol Stream, Illinois. USA CapitalAdvanced.Com Phone 630-690-1696 Fax 630-690-2498 X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for capital advanced technologies manufacturer: Other Similar products are found below : 6010 US-2007 33208 33305 US-4007 US-5016 6306 US-5014 6816 33106 6520 33306 US-5012 US-3014 US-3008 US-2008 33110 US-3012 6405 US-3010 33008 US-1010 US-5008 33310 US-2012 US-4012 US-1009 33003 9163 9082 33708 US-1008 US-4010 US- 2006 33410 6115 US-1006 6112 33405 33105 US-1007 6908 6106 6109 6410 6008 33010 33308 6303 33205