Tippette
Tippette
FULL SIZED ROCKER SWITCHES
The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These
switches are appropriate for use in general purpose applications which may or may not require a modicum of
environmental protection. The Tippette Series is available in both illuminated and non-illuminated versions
and features a wide variety of circuits, actuator styles and bracket options. This versatile offering includes
international agency certifications and ratings to 26 amps for select circuits.
Product Highlights: Typical Applications:
Ratings Up to 26 Amps 250 VAC General Purpose Applications
Illuminated or Non-Illuminated Commercial Food Equipment
Multiple Termination, Mounting and Recreational Vehicles
Rocker Options
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Email: sales@carlingtech.com www.carlingtech.com
Application Support: team2@carlingtech.com
Phone: 860.793.9281 Fax: 860.793.9231|
2 Tippette Actuator Styles & Special Circuits - General Specifications
Electrical Physical
Contact Rating 15 amps, 125 VAC Lighted Incandescent - rated 10,000 hours
10 amps, 250 VAC Neon - rated 25,000 hours
3/4 HP 125-250 VAC Seals Bracket - Actuator WBL/MBL
15 amps, 12-30 VDC optional external gasket panel seal
Life 25,000 cycles circuit dependent Base Phenolic (150C)
50,000 cycles circuit dependent Rocker/Bracket Nylon 66 (105C)
consult factory for applicable
circuits.
Contacts Fine silver, silver cad-oxide
Mechanical
Terminals Brass or copper/silver plate
Endurance 100,000 cycles minimum
1/4 (6.3mm) Quick Connect
terminations standard.
Solder lug - Brass Tin Plated
Wire Lead 16 gauge standard 105C
Mounting
600VAC
1.190 [30.22]
Screw Terminals - Brass
.680 [17.27]
MOUNTING HOLE
(Nylon Snap-in Brackets)
.830 [21.08]
Agency Certifications
Panel Thickness:
.040 min. - .250 max.
55 - 4 places
1.450 [36.83]
Select circuits and constructions with VDE/IEC approvals
are available. Consult factory
*Angled corners are suggested for optimum fit.
Standard rectangular cutout is acceptable.
*Manufacturer reserves the right to change product specification without prior notice.
Email: sales@carlingtech.com Application Support: team2@carlingtech.com
Phone: (860) 7939281 Fax: (860) 7939231 www.carlingtech.com