CTD1X1505AXXX Carlo Gavazzi

Accessories AC Current Transformer (max 23mm cable) Type CTD-1X Cable and bus-bar type current transformer 0.5 class, currents from 50 to 300 A Removable DIN-rail mounting holder Removable panel fixing clips 2 cable/bus-bar isolated fixing screws Double screw terminals (up to 8-wire connections) Sealable terminal block covers Product Des cript ion Ordering Key CTD-1X 100 5A XXX Cable/Bus-bar type current Rated primary currents from Model transformer with DIN-rail/bus- 50 A to 300 A. Primary current bar and panel mounting Secondary current facility. Option Optional fixing kit: CTD-kit Type Selection Primary current Secondary current Option From 50 to 300A 1A XXX: none (Refer to Range Table) 5A XTX: tropicalization Input Specifications Operating frequency 48 to 62 Hz Two panel mounting fixing clips. Max. system voltage 0.72 kV Special features 1 A secondary current, Rated insulation level 3 kV/1 min. 50 Hz Tropicalization Insulation class E (max 75C) Working temperature -25C to +60C (-13F to Short-time current rating 140F) (R.H. < 90% non condensing 40C) I Typical 100 I /1 s th n I 2.5 I dyn th Storage temperature -30C to +70C (-22F to The short-time thermal 158F) (R.H. < 90% non condensing 40C) current I is anyway limited th by the cable/bus-bar size Approvals CE, cUrus and CSA Connection Screw type Extended current rating 120% 2 Cable cross section area From 1.5 to 6 mm Security factor (FS) 5 (Class: 0.5, 1 and 3) Min/Max screws tightening torque relevant to terminal block screws: General Specifications From 1 to 2 Nm Max screws tightening Standards According to EN61869-2 torque relevant to the Housing ABS, self-extinguishing: cable/bus-bar fixing UL 94 V-0 screws: 0,3 Nm Mounting DIN-rail bus-bar Protection degree IP00 and panel mounting IP20 (with sealable terminal block covers + wire termi Standard accessories Two terminal block screws. nals) Two sealable terminal block covers. Cable diameter Max. 23 mm Two panel mounting Bus-bar size Max. 20x5 mm fixing clips. Weight From 150 to 200 g One DIN rail adapter. Optional accessories Extended fixing kit CTD-kit: Six cable/bus-bar fixing screws. Output Specifications Six plastic caps for cable/bus-bar fixing Rated secondary current 5 A or 1 A screws. Specifications are subject to change without no tice CTD-1X DS ENG 140116 1CTD-1X Range Table Model CTD-1X from 50A to 100A Model CTD-1X from 120A to 300A Primary Primary Burden (VA) Burden (VA) Current Current A CL 0.5 CL 1 CL 3 A CL 0.5 CL 1 CL 3 50 ( 60C/140F) 1 1.25 120 ( 60C/140F) 1.75 2 2.5 60 ( 60C/140F) 1 1.25 125 ( 60C/140F) 2 2.25 2.75 70 ( 60C/140F) 1.5 1.75 150 ( 60C/140F) 2.25 2.5 3 75 ( 60C/140F) 1 1.25 1.75 160 ( 60C/140F) 2.5 2.75 3.25 80 ( 60C/140F) 1.25 1.5 2 200 ( 60C/140F) 3 3.25 3.75 100 ( 60C/140F) 1.5 1.75 2.25 250 ( 50C/122F) 4.5 4.75 5.25 300 ( 50C/122F) 5 5.5 6 Benefits 1 2 3 4 5 10 6 7 8 9 Easy and quick mounting either on a panel or Dimensions (mm) on a DIN-rail (see figure 1-2). Protection of screw terminals using specific 44 sealable covers to assure always the best 30 safety (see figure 3). Bridging of current transformer output without changing the connection of the secondary, so to avoid any output overvoltage during either the maintenance or the installation procedure (see figure 4). Easy output and earth connection (see fig. 5). Screw terminals compatible with any kind of wire terminals (see figure 6-7-8-9). Multiple screws provided with insulation caps to grant a strong and reliable fixing of the current transformer to the bus-bar (see figure 10). Wiring Diagram S1 S2 22 44 69,2 L 46 P1 P2 N 2 Specifications are subject to change without no tice CTD-1X DS ENG 140116 23,3 27 65,2 83,6