Monitoring Relays 3-Phase Sequence Types DPA02, PPA02 3-Phase monitoring relays for phase sequence Measure their own power supply Power supply range: 208 to 240 and 380 to 415 VAC (15%) Output 8 A SPDT relay normally energized For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in module 22.5 mm Euronorm housing (DPA02) or 36 mm Plug- in module (PPA02) LED indication for relay ON DPA02 PPA02 Product Description Ordering Key DPA 02 C M40 Housing 3-phase relay for detection covered by two multi voltage Function of incorrect phase sequence. relays. For mounting on Type Supply range from 208 to DIN-rail or Plug-in module. Item number 240 and 380 to 415 VAC Output Power supply Type Selection Mounting Output Supply: 208-240 VAC Supply: 380-415 VAC DIN-rail SPDT DPA 02 C M23 DPA 02 C M40 Plug-in SPDT PPA 02 C M23 PPA 02 C M40 Input Specifications Output Specifications Input Output SPDT relay, N.E. L1, L2, L3 DPA02: Terminals L1, L2, L3 Rated insulation voltage 250 VAC PPA02: Terminals 5, 6, 7 Measure their own supply Contact ratings (AgSnO) 2 Resistive loads AC 1 8 A 250 VAC Measuring ranges DC 12 5 A 24 VDC 208 to 240 VAC 177 to 275 VAC Small inductive loads AC 15 2.5 A 250 VAC 380 to 415 VAC 323 to 475 VAC DC 13 2.5 A 24 VDC 6 Mechanical life 30 x 10 operations 5 Electrical life 10 operations Supply Specifications (at 8 A, 250 V, cos = 1) Operating frequency 7200 operations/h Power supply Overvoltage cat. III Dielectric strength Rated operational voltage (IEC 60664, IEC 60038) Dielectric voltage 2 kVAC (rms) through terminals: Rated impulse withstand volt. 4 kV (1.2/50 s) L1, L2, L3 (DPA02) 5, 6, 7 (PPA02) M23: 208 to 240 VAC 15%, 45 to 65 Hz M40: 380 to 415 VAC 15%, 45 to 65 Hz Rated operational power 5 VA 230 VAC, 50 Hz (M23) 6,5 VA 230 VAC, 60 Hz (M23) 8 VA 400 VAC, 50 Hz (M40) 8,5 VA 400 VAC, 60 Hz (M40) Supplied by L2 and L3 Specifications are subject to change without notice (02.05.11) 1DPA02, PPA02 General Specifications Reaction time Weight Approx. 100 g Alarm ON delay < 100 ms Screw terminals Alarm OFF delay < 100 ms Tightening torque Max. 0.5 Nm Indication for acc. to IEC 60947 Relay ON LED, yellow Product standard EN 60947-5-1 Environment (EN 60529) Approval CSA Degree of protection IP 20 CCC (GB14048.5) only DPA Pollution degree 3 (DPA02), 2 (PPA02) CE Marking L.V. Directive 2006/95/EC (IEC 60664) EMC Directive 2004/108/EC Operating temperature EMC Max. voltage, 50 Hz -20 to 60C, R.H. < 95% Immunity According to EN 61000-6-2 Max. voltage, 60 Hz -20 to 50C, R.H. < 95% Emissions According to EN 61000-6-3 Storage temperature -30 to 80C, R.H. < 95% Housing Dimensions DPA02 22.5 x 80 x 99.5 mm PPA02 36 x 80 x 94 mm Material PA66 or Noryl Mode of Operation Operation Diagram DPA02 and PPA02 monitor Example their own 3-phase power The relay monitors the supply. The relay operates mains phase sequence. when the phase sequence is correct. Wiring Diagrams 6 4 3 5 7 1 DPA02 PPA02 Dimensions DIN-rail Plug-in 94 22.5 99.5 90 36 28.5 28.5 2 Specifications are subject to change without notice (02.05.11) 80 83.5 63 80 63