Photoelectrics Type EF 1801 Fiber Optic Sensor Range: Fiber dependent, typ. 100 mm Adjustable sensitivity Modulated, red light Rated operational voltage: 10 to 40 VDC Output: DC 200 mA NPN or PNP Make and break switching function, LED indication Heavy duty M18 metal housing, IP 67 Cable and plug versions For 2.2 mm fiber cable with 1 mm core MB 18 A for DIN-rail mounting (see Accessories) Product Description Ordering Key EF 18 01 PPA S - 1 Used in through-beam, retro- put ON. Short M18 metal Type reflective or diffuse-reflective housing for heavy duty appli- Housing diameter applications depending upon cations. The fiber allows posi- Range how the additional fibers are tioning and mounting in tight Output type mounted. Easily adjustable spaces with the photoelectric Housing material sensitivity with 270 potentio- sensor itself mounted in a Connection type meter. LED indication for out- more convenient location. Type Selection Housing Rated Ordering no. Ordering no. Ordering no. Ordering no. diameter operating NPN/cable NPN/plug PNP/cable PNP/plug dist. (S ) Make & break swit. Make & break swit. Make & break swit. Make & break swit. n M18 Fiber depend. EF 1801 NPAS EF 1801 NPAS-1 EF 1801 PPAS EF 1801 PPAS-1 Specifications Rated operating dist. (S ) Fiber dependent Operating frequency (f) 120 Hz, light/dark ratio 1:2 n Temperature drift 0.4%/K Response time OFF-ON (t ) 3.2 ms ON Hysteresis (H) ON-OFF (t ) 5 ms OFF (Differential travel) 3 to 20% Power ON delay (tV) Typ. 100 ms Rated operational volt. (U ) 10 to 40 VDC B (ripple included) Indication Output ON LED, yellow Ripple (U ) 10% rpp Environment Output current Overvoltage category III (IEC 60664/664A 60947-1) Continuous (I ) 200 mA e Pollution degree 3 (IEC 60664/664A 60947-1) Short-time (I) 200 mA, Degree of protection IP 67 (IEC 60529 60947-1) max. load capacity 100 nF Temperature No load supply current (I ) 20 mA, O Operating -20 to +60C (-4 to 140F) Min. load current (I ) 0.5 mA m Storage -30 to + 70C (-22 to 158F) OFF-state current (I ) 100 A r Vibration 10 to 150 Hz, 0.5 mm/7.5 g Voltage drop (Ud) 2.5 V (IEC 60068-2-6) Protection Reverse polarity, Shock 2 x 1 m & 100 x 0.5 m short circuit, transients (IEC 60068-2-32) Transient voltage Max. 1 kV/0.5 J Dielectric voltage 500 VAC (rms) Sensitivity Adjustable, 270 turn Housing material potentiometer, Body Nickel-plated brass Front TPE/POM, black Light source 660 nm Cable end Polyester, black Light type Red, Nuts Nickel-plated brass modulated, synchronized Specifications are subject to change without notice (06.03.2006) 1EF 1801 Specifications (cont.) Dimensions Connection Cable Grey, 2 m, oilproof PVC, 2 4 x 0.35 mm Note: Other cable lengths on request Plug (-1) M12 Cables for plug (-1) CONH1A-. serie Weight EF 1801 .PAS Cable version 115 g Plug version 40 g CE-marking Yes EF 1801 .PAS-1 Operation Diagram Power supply Object present, light received Tv Output ON: Make switching (NO) BK (4) Tv Break switching (NC) WH(2) Truth Table Wiring Diagrams Make switching Break switching 1 BN Object present No Yes No Yes 4 BK 2 WH DC types LED OFF ON OFF ON PPAS 3 BU Load Non-active Active Active Non-active 1 BN Output NPN High Low Low High Output PNP Low High High Low 2 WH 4 BK 3 BU NPAS Accessories Delivery Contents Fiber optics - call for further information Photoelectric switch: EF 1801.... Connector type CON.1A../CON.14NF.. series 2 nuts M18 mounting bracket MB 18A for direct surface or Please refer toAccessorie DIN-rail mounting Screw driver Fiber cutter Packaging: cardboard box 2 Specifications are subject to change without notice (06.03.2006)