Proximity Sensors Inductive Analogue Position Sensor Types EI, M 18, M 30 Nickel-plated brass housing, cylindrical Diameter: M 18, M 30 Sensing range: EI 1805 I020: 2 to 5 mm EI 3008 I020: 3 to 8 mm Power supply: 15 to 30 VDC Current source output: 0 to 20 mA Protection: Reverse polarity, internal current limiter 2 m cable or plug M12 Product Description Ordering Key EI 1805 I020-1 EI 1805 I020-1 Cylindrical analogue position tended with level amplifier relay Type: Inductive switch sensor in M 18 and M 30 nick- S 183 and analogue display to Housing diameter el-plated brass housings. High make up complete measuring Rated operating dist. (mm) degree of linearity, output cur- systems. Current output 0 to 20 mA rent 0 to 20 mA. Can be ex- Connection type Type Selection Housing Rated Ordering no. Ordering no. diameter operating Output type Output type dist. (S ) 0 to 20 mA 0 to 20 mA n 1) M 18 2 to 5 mm EI 1805 I020 EI 1805 I020-1 1) M 30 3 to 8 mm EI 3008 I020 EI 3008 I020-1 1) For flush mounting in metal Specifications Ambient temperature Rated operational volt. (U ) 17 to 27 VDC e Operating -15 to +65C (+5 to +144F) (U ) 15 to 30 VDC B Storage -20 to +70C (-4 to +158F) (ripple included) Degree of protection IP 67 Ripple 10% (Nema 1, 3, 4, 6, 13) Rated operational current (Ie) 0 to 20 mA Housing material (R load: 0 to 500 ) Body Nickel-plated brass Max. 30 mA (current limiter) Front Blue thermoplastic No-load supply current (I ) 7 mA (no load) o polyester Protection Reverse polarity Back Black thermoplastic current limiter polyester 2 Transient voltage 2 kV/0.5 J (prepared) Cable 2 m, 3 x 0.25 mm grey PVC, oil proof Power ON delay Safe operation after 1 s Weight (cable included) EI 1805 I020 85 g Rate of rise EI 1805 I020 1 mm/ms EI 3008 I020 195 g EI 3008 I020 3 mm/ms Tightening torque EI 1805 I020 17.5 Nm Assured operating dist. (S ) EI 1805 I020 2 to 5 mm a EI 3008 I020 35.0 Nm EI 3008 I020 3 to 8 mm Repeat accuracy (R) 1% Usable operating dist. (S ) EI 1805 I020 u 2 m/C per mm EI 3008 I020 1 m/C per mm Specifications are subject to change without notice 1EI, M 18, M 30 Dimensions Type A B C D E F G H I SW mm mm mm mm mm mm mm mm mm EI 1805 I020 M 18 x 1 71 20.5 2000 52 19 10 5.2 4 24 EI 3008 I020 M 30 x 1.5 67 20.5 2000 48 19 10 5.2 5 36 EI .... I020 Output curves EI 1805 I020 EI 3008 I020 Wiring Diagram Installation Hints Power Supplies Refer to Installation Hint, Power supplies VAC: > SS 110. Refer to Wiring Diagram, Technical information. Power supplies VDC: > SS 130/140. Technical information. 2 Specifications are subject to change without notice