Photoelectrics Diffuse-reflective Type EO1804.PAS, DC, Metal-housing Range: 400 mm adjustable Modulated, infrared light Supply voltage: 10 to 40 VDC Output: 200 mA NPN or PNP Make and break switching function, LED indication Protection: Reverse polarity, short-circuit, transients High immunity to ambient light Heavy duty M18 metal housing, IP67 Cable and plug versions Product Description Ordering Key EO 18 04 NPA S-1 The EO1804 is a family of sensing performance. The Type general purpose Diffuse- sensors are easy to adjust Housing diameter reflective sensors in a short with 270 single turn poten- Range M18 metal housing for tiometer. The output is a 4- Output type heavy duty applications. wire complementary (NO Housing material They are useful for simple and NC) output in NPN (cur- Connection type applications where a basic rent sinking) or PNP (current sensor provides adequate souring). Type Selection Housing Rated Ordering no. Ordering no. Ordering no. Ordering no. diameter operating NPN/cable NPN/plug PNP/cable PNP/plug dist. (S ) Make & break swit. Make & break swit. Make & break swit. Make & break swit. n M18 400 mm EO 1804 NPAS EO 1804 NPAS-1 EO 1804 PPAS EO 1804 PPAS-1 Specifications Rated operating dist. (S ) Light type Infrared, n Adjustable Up to 400 mm modulated synchronized 1 Reference target: Sensing angle 25 at / range 2 Kodak test card R27, white, Ambient light Max. 10,000 lux 90% reflectivity Operating frequency (f) 120 Hz, light/dark ratio 1:2 200 x 200 mm Response time Sensitivity 270 turn potentiometer OFF-ON (t ) 3.2 ms ON Temperature drift 0.4%/K ON-OFF (t ) 5 ms OFF Hysteresis (H) Power ON delay (t ) Typ. 100 ms V (Differential travel) 3 to 20% Indication function Dark and light Rated operational volt. (U ) 10 to 40 VDC (ripple included) B (complementary switch) Ripple (U ) Max. 10% rpp Output ON LED, yellow Output current Environment Continuous (I ) Max. 200 mA e Overvoltage category III (IEC 60664/60664A 60947-1) Short-time (I) 200 mA, Pollution degree 3 (IEC 60664/60664A 60947-1) max. load capacity 100 nF Degree of protection IP 67 (IEC 60529 60947-1) No load supply current (IO) Max. 20 mA Temperature Min. operational current (I ) 0.5 mA Operating -20 to +60C (-4 to 140F) m Storage -30 to + 70C (-22 to 158F) OFF-state current (I ) Max. 100 A r Vibration 10 to 150 Hz, 0.5 mm/7.5 g Voltage drop (U ) Max. 2.5 V 200 mA d (IEC 60068-2-6) Protection Reverse polarity, short circuit, Shock 2 x 1 m & 100 x 0.5 m transients (IEC 60068-2-32) Transient voltage Max. 1 kV/0.5 J Dielectric voltage 500 VAC (IEC 60365-4-41) Light source GaAlAs LED, 880 nm Specifications are subject to change without notice (08.02.06) 1(inch) EO 1804.PAS, DC Specifications (cont.) Wiring Diagrams Housing material + 1 BN Body Nickel plated brass 4 BK Front Luran , black Cable end Polyester, black 2 WH Nuts Nickel plated brass Connection 2 3 BU Cable Grey, 2 m, 4 x 0.35 mm PNP - oilproof PVC Plug M12 x 1 + 1 BN Cables for plug (-1) CON.1-.... series Weight Cable version 140 g 2 WH Plug version 55 g 4 BK Approvals UL, CSA 3 BU CE-marking Yes - NPN Operation Diagram Power supply Object present, light received Tv Output ON: Make switching (NO) BK (4) Tv Break switching (NC) WH (2) Dimensions Detection Diagram Sensor Y (inch) X R27 Kodac test card 4 8 12 16 20 60.0 2.4 40.0 1.6 20.0 0.8 0.0 0 -20.0 -0.8 -40.0 -1.6 -60.0 -2.4 0.0 100.0 200.0 300.0 400.0 500.0 Distance (mm) Note: Sensitivity only 400 mm adjustable Delivery Contents Accessories Photoelectric switch EO1804.PAS(-1) MB18A 2 nuts Connector type CON.1A../CON.14NF.. series Packaging: plastic bag Screw driver for adjustments: 77-000 APA18-RAR For further information refer to Accessories 2 Specifications are subject to change without notice (08.02.06) (mm)