Photoelectrics Retro-reflective Type ER1830.PAS, DC, Metal-housing Range: 3 m Modulated infrared light Supply voltage: 10 to 40 VDC Output: 200 mA NPN or PNP Make and break switching function, LED indication Protection: Reverse polarity, short circuit, transients High immunity to ambient light Cable and plug versions Product Description Ordering Key ER 18 30 NPA S-1 Retro-reflective photoelectric tion. Short M18 metal housing Type switch with extended range for heavy duty applications. IP Housing diameter up to 3 m. Easily adjustable 67. Easy mounting. DC and Range sensitivity with 270 poten- AC types, fully protected. Output type tiometer. LED output indica- Housing material Connection type Type Selection Housing Rated Ordering no. Ordering no. Ordering no. Ordering no. diameter operating NPN/cable NPN/plug PNP/cable PNP/plug dist. (S ) Make & break swit. Make & break swit. Make & break swit. Make & break swit. n M18 3 m ER 1830 NPAS ER 1830 NPAS-1 ER 1830 PPAS ER 1830 PPAS-1 Specifications Rated operating dist. (S ) Up to 3 m Optical angle 2.2 n Ref. reflector type ER4 Light spot size 150 mm at 2 m 84 mm Ambient light Max. 10,000 lux Sensitivity Operating frequency (f) Max. 120 Hz, light/dark ratio 1:2 Adjustable 270 single turn pot. meter Response time Temperature drift 0.4%/K OFF-ON (tON) 3.2 ms ON-OFF (tOFF) 5 ms Hysteresis (H) (Differential travel) 3 to 20% Indication function Dark and light (complementary switch) Rated operational volt. (U ) 10 to 40 VDC (ripple included) B Output ON LED, yellow Ripple (U ) Max. 10% rpp Environment Output current Overvoltage category III (IEC 60664/60664A 60947-1) Continuous (I ) Max. 200 mA e Pollution degree 3 (IEC 60664/60664A 60947-1) Short-time (I) 200 mA, Degree of protection IP 67 (IEC 60529 60947-1) max. load capacity 100 nF Temperature No load supply current (I ) Max. 20 mA 200 mA O Operating -20 to +60C (-4 to 140F) Min. operational current (I ) 0.5 mA m Storage -30 to + 70C (-22 to 158F) OFF-state current (I ) Max. 100 A r Vibration 10 to 150 Hz, 0.5 mm/7.5 g (IEC 60068-2-6) Voltage drop (U ) Max. 2.5 V d Shock 2 x 1 m & 100 x 0.5 m Protection Reverse polarity, short circuit (IEC 60068-2-32) overload, transients Dielectric voltage 600 VAC (IEC 60364-4-41) Transient voltage 1 kV/0.5 J Housing material Power ON delay (t ) Typ. 100 ms v Body Nickel plated brass Light source GaAlAs LED, 880 nm Front Luran , black Light type Infrared, modulated Cable end Polyester, black Nuts Nickel plated brass Specifications are subject to change without notice (08.02.06) 1(inch) ER1830.PAS, DC Specifications (cont.) Dimensions Connection 2 Cable Grey, 2 m, 4 x 0.35 mm , oilproof PVC Plug M12 x 1 Cables for plug (-1) CON.1A-...series Weight Cable version 140 g Plug version 55 g Approvals UL, CSA CE-marking Yes Operation Diagram Power supply Object present, light beam interrupted Output ON: Break switching (NC), WH (2) Tv Tv Make switching (NO), BK (4) Wiring Diagrams Detection Diagram Sensor Y (feet) + 1 BN X ER4 Reflector 1.6 3.3 4.9 6.6 9.8 11.5 13 8.2 4 BK 60.0 0.8 2 WH 30.0 0.4 3 BU 0 0.0 - NPN PNP -30.0 -0.4 -60.0 -0.8 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Distance (m) Installation Hints To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct The cable should not be pulled A proximity switch should not serve as Any repetitive flexing of the cable should be avoided mechanical stop Delivery Contents Accessories Photoelectric switch: ER1830 Reflectors: ER series 2 nuts Connector type CON.1A../CON.14NF.. series Packaging: plastic bag MB18A APA18-RAR For further information refer toAccessorie 2 Specifications are subject to change without notice (08.02.06) (mm)