Fiber Optic Sensor Amplifier Type FA1 Distance range is fiber dependent Please see the FUR, FUT datasheet Easy set-up using 3-ways adjustment switch 2 X 4 digits display to show signal level and threshold Display direction can be inverted to suit different mounting Output 100mA NPN or PNP Light on and dark on switching selectable Operational voltage 12 to 24 VDC On, off, on one shot, off one shot delay timer Response time 200, 500, 1000, 5000S Product Description Ordering Key FA 1-N FA1 series amplifier is a fiber FA1 is also equipped with Type optic amplifier most suitable a 3-ways adjuster switch to Series to be used with FUR/FUT fib- adjust sensitivity and different Output ers to achieve various detec- response time. tion distance. The sensor output is either NPN or PNP and is select- FA1 has a 2 x 4 digits LED able to be light on or dark on. display to show the sig- There is also a timer for the nal level and threshold output which can be selected respectively. Display direction to be on delay, off delay, on can be inverted to suit differ- one shot and off one shot to ent installation needs. suit most applications needs. Type Selection Housing Ordering no. Ordering no. W x H x D NPN PNP Light on or dark on switching Light on or dark on switching 10 x 33 x 80 mm FA1-N FA1-P Specifications Rated operating distance (S ) Fiber dependant Output function NPN or PNP n Please see FUR, FUT Light on or dark on Selected via switch datasheet Timer Sensitivity Increase or decrease by Type On, off, on one shot, 3-ways adjuster switch. off one shot Switch left/right to +/- and Range 0-9999 ms press down to confirm Current consumption (I ) < 40 mA 24 VDC o Sensitivity Range Depends on selected Voltage drop (U ) d response time FA1-N 1V (100 mA Load) FA1-P 1.5V (100 mA Load) 27-3991 200s Protection Short-circuit, reverse pola- 27-3982 500s rity, transients 27-9988 1000s Light source Red LED 660 nm 27-9990 5000s Ambient light Temperature drift < 0.2%/C Incandescent light 10000 Lux Sunlight 20000 Lux Hysteresis (H) 20% of sensing distance Operating frequency Max. 2.5 kHz Rated operational volt. (U ) 12 to 24 VDC B Response time Selectable 200, 500, 1000, Ripple (U ) 10% rpp 5000s Output current Continuous (I ) 100 mA e Specifications are subject to change without notice (28.08.2015) 1 FA1 Specifications (cont.) Power ON delay (t ) < 150 ms Housing material v Body ABS Indication Output Red LED Connection Sensitivity 2 X 4 digits display Cable PVC, black, 2m, 3 wires Red signal level Weight Approx. 65g Green - threshold Approvals CE, cULus (UL508) Temperature Environment Operating 0 to +60C (32 to +140F) Degree of protection IP40 Operation Diagram Wiring Diagram NPN output Input L. on Brown DC12-24V T T T T ON delay Black NPN OFF delay Blue 0V ON one shot PNP output OFF one shot Brown DC12-24V Black PNP Blue 0V Dimensions 79.35 10 Receiver 33 31.5 7 10 9 4.2 2M Cable 18.5 36.5 Emitter 72 11 3.8 LED and Operation Panel Output indicator Operation panel L.on/D.on switch Mode switch L.on D.on FUN. L.on D.on FUN. OUT Run SET OUT Run SET + - 9999 9999 ADJ + - Red: signal level 9999 9999 ADJ Green: threshold Adjustment switch / Push down confirm button 2 Specifications are subject to change without notice (28.08.2015)