Fiber Optics, Plastic Types FUR, FUT Inner fiber diameter 0.25, 0.5 or 1.0 mm Outer fiber diameter 2.2, 1.25 mm Bending radius 10, 15 or 25 mm For use with fiber optic sensor amplifier FA series Overmoulding protection for better curvature and protection from breakage of fiber High tensile strength of 8 kg ensuring reliability and durability 2000 mm fiber length Over moulding for better curvature protection Ordering Key FU R C 6 -20 /S10 Fiber unit Fiber type R Reflective T Through-beam Fiber diameter O 1.0 mm/2.2 C 0.25 mm x 10/0.5 mm x 1 A 0.25 mm/1.25 D 0.5 mm/1.25 S 0.5 mm/2.2 Head diameter 6 M6 4 M4 3 M3 Fiber length 2000 mm Options /E Extended range /A Angled /S10 Sleeve 10 mm /S20 Sleeve 20 mm /S40 Sleeve 40 mm /S90 Sleeve 90 mm Note: 1. Not every combination is available. 2. Please see Type Selection section to see availability 3. Sleeve option is not available if you choose extended range (/E) or angled (/A) version General Specifications Temperature range Materials Operating temperature -55 to +70C (-67 to +158F) Fiber PMMA Sheath PE (polyethylene) Detection head SUS303 Note 3: FURO6-20/E, FURD4-20/E, FURD3-20/E, FUTO4-20/E, FUTO3-20/E head is made of nickel plated brass Specifications are subject to change without notice (22.09.2016) 1 FUR, FUT Type Selection Reflective types Inner Max. Smallest Min. Dimensions (mm)** Weight Ordering key diameter detection detecta- bend (g) distance ble object radius (mm)* FURO6-20 FURO6-20/S10 1.0 x 2 90 0.50 R25 38 FURO6-20/S20 FURO6-20/S40 M6 FURO6-20/S90 1.0 x 2 60 0.50 R25 30 FURO6-20/A 1.0 x 2 100 0.50 R25 38 FURO6-20/E*** FURC6-20 FURC6-20/S10 1.0 x 1, 90 0.50 R25 38 FURC6-20/S20 0.265 x 16 FURC6-20/S40 FURC6-20/S90 FURC4-20 FURC4-20/S10 0.5 x 1, 40 0.05 R15 25 FURC4-20/S20 0.25 x 10 FURC4-20/S40 FURC4-20/S90 0.5 x 1, 20 0.05 R15 30 FURC4-20/A 0.25 x 10 FURC3-20 FURC3-20/S10 0.5 x 1, 40 0.05 R15 25 FURC3-20/S20 0.25 x 10 FURC3-20/S40 FURC3-20/S90 0.5 x 1, 20 0.05 R15 29 FURC3-20/A 0.25 x 10 FURD4-20 FURD4-20/S10 0.5 x 2 20 0.10 R15 25 FURD4-20/S20 FURD4-20/S40 FURD4-20/S90 0.5 x 2 20 0.10 R15 20 FURD4-20/A *note 1 : Detection distance in the table is based on FA1 amplifier with setting response time at 5000S and threshold value at 27 (max setting) **note 2 : Dimensional drawing shown here is for the standard version (without sleeve). ***note 3 : Head is made of nickel plated brass 2 Specifications are subject to change without notice (22.09.2016)