Receiver for Digital Signals Du line Type G 3830 5543 Fieldbus Installationbus 8-channel receiver Galvanically separated SPST relay outputs Load: 8 x 5 A/250 VAC H8-housing For mounting on DIN-rail (EN 50022) LED-indications for supply, Dupline carrier and outputs AC or DC power supply Channel coding by GAP 1605 Product Description Ordering Key G 3830 5543 024 Dupline receiver. trol of 8 loads of up to 250 Type: Dupline SPST relay outputs for con- VAC/5 A. H8-housing Receiver No. of channels Output type Power supply Type Selection Supply Ordering no. 8 channels 5 A/250 VAC 24 VAC G 3830 5543 024 115 VAC G 3830 5543 115 230 VAC G 3830 5543 230 15-30 VDC G 3830 5543 824 Supply Specifications Power supply AC types Overvoltage cat. III (IEC 60664) Power supply DC type Overvoltage cat. III (IEC 60664) Rated operational voltage Rated operational voltage through term. 21 & 22 230 230 VAC, 15% (IEC 60038) through term. 21 & 22 824 15 to 30 VDC (ripple included) 115 115 VAC, 15% (IEC 60038) Ripple 3 V 024 24 VAC, 15% Reverse-polarity protection Yes Frequency 45 to 65 Hz Rated operational power 1.5 W Voltage interruption 40 ms Power dissipation 5.5 W Rated operational power Typ. 7.0 VA Inrush current 1 A Rated impulse withstand Rated impulse withstand voltage 230 4 kV voltage 800 V 115 2.5 kV Dielectric voltage 024 800 V Supply - Dupline 200 VAC (rms) Dielectric voltage Supply - Inputs 4 kVAC (rms) Supply - Dupline 4 kVAC (rms) Supply - Outputs 4 kVAC (rms) Supply - Outputs 4 kVAC (rms) Output Specifications 6 Outputs 8, SPST relays Mechanical lifetime 30 x 10 operations Isolated in groups of 8 x 1 Electrical lifetime 5 Contact ratings (AgCdO) (micro gap) (at max. load) AC 1 2.0 x 10 operations Resistive loads AC 1 5 A/250 VAC (1250 VA) Operating frequency 7200 operations/h DC 1 0.25 A/250 VDC (62 W) Dielectric voltage or 5 A/25 VDC (125 W) Outputs - Dupline 4 kVAC (rms) Inductive loads AC 15 2.5 A/230 VAC Response time 1 pulse train DC 13 5 A/24 VDC Specifications are subject to change without notice (08.10.2007) 1 Dupline is a registered trademark. A product of the CARLO GAVAZZI GroupG 3830 5543 Du line Fieldbus Installationbus General Specifications Mode of Operation 8-channel receiver with 8 The default setting of the Output OFF delay normally open contact out- module is such that upon upon loss of Dupline carrier 20 ms puts. Each output may be loss of Dupline carrier all Power ON delay Typ. 2 s coded individually by means the outputs go off. Indication for of the code programmer Supply ON LED, green GAP 1605. For details, Output connections Dupline carrier LED, yellow please refer to the respective Output ON LED, red (one per output) Output 1: terminals 29 & 30 data sheet. Environment Output 2: terminals 31 & 32 Degree of protection IP 20 Output 3: terminals 33 & 34 The outputs are normally off. Pollution degree 3 (IEC 60664) Output 4: terminals 35 & 36 When a transmitter coded to Operating temperature -20 to +50C (-4 to +122F) Output 5: terminals 9 & 10 the selected channel is ac- Storage temperature -50 to +85C (-58 to +185F) Output 6: terminals 11 & 12 tivated, the output turns on Output 7: terminals 13 & 14 and remains on until the re- Humidity (non-condensing) 20 to 80% Output 8: terminals 15 & 16 spective channel becomes Mechanical resistance deactivated. Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz) Dimensions Material (see Technical information) H8-housing Weight 800 g Operation Diagram Power supply Dupline carrier Transmission on channel for output 1 Output 1 (term. 29 & 30) Transmission on chan. for output 2 Output 2 (term. 31 & 32) Wiring Diagram Dimensions (mm) H8-housing out out out out 5 6 7 8 out out out out 1 2 3 4 Power supply S: signal wire Accessories DIN-rail FMD 411 For further information seeAccessorie. 2 Specifications are subject to change without notice (08.10.2007) Dupline is a registered trademark. A product of the CARLO GAVAZZI Group