G61101145 Carlo Gavazzi

Transmitter with Inductive Du line Proximity Switch Function Fieldbus Installationbus Type G 6110 1145 Stainless steel housing, cylindrical Diameter: M18 Short version Flush mounting Sensing distance: 5 mm Powered by Dupline Available with M12 connector or with 2 m cable Freely programmable channel code by GAP 1605 Product Description Ordering Key G 6110 1145 grammer. The unit activates Self-powered Dupline induc- Type: Dupline the coded channel whenever tive proximity switch. The the proximity of a metallic channel code is freely pro- object is detected. grammable by GAP 1605 pro- Type Selection Housing diameter Connection Rated operating dist. (S ) Ordering Number n 1) M18 Cable 5 mm G 6110 1145 1) M18 M12 plug 5 mm G 6110 1145-1 1) For flush mounting in metal Input Specifications Supply Specifications Power supply Supplied by Dupline Input Inductive proximity switch Reverse polarity protection Yes Nominal sensing distance S 5 mm n Rated operational current Typ. 900 A Effective sensing range S 0.9 x S S 1.1 x S r n r n Usable operating range S 0.9 x S S 1.1 x S u r u r Assured operating range S 0 < S < 0.81 x S a a n Hysteresis H Typ. 7% Response time 1 Dupline pulse train Reduction Factors General Specifications The nominal sensing distance is reduced by the use of metal Power On delay Typ. 5 mS and alloys other than ST 37. Most important reduction factors Environment for the inductive proximity switch are: Degree of protection IP 67 Pollution degree 3 (IEC 60664) Stainless steel 0.6 x Sn Operating temperature -25 to +70C (-13 to +158F) Brass 0.4 x Sn Storage temperature -30 to +80C (-22 to +176F) Aluminium 0.3 x Sn Mechanical resistance Copper 0.2 x Sn Tightening torque 2.6 Nm Material Housing & Body Stainless steel (1.4301) Back Black polyester Front Grey thermoplastic polyester Cable type PVC, grey, oil proof, 2 3 x 0.3 mm Cable length 2 m Weight (cable included) 25 g Specifications are subject to change without notice (30.01.2007) 1 Dupline is a registered trademark. A product of the CARLO GAVAZZI GroupG 6110 1145 Du line Fieldbus Installationbus Mode of operation The G 6110 1145 inductive a metallic object is brought The inductive proximity proximity switch with built-in within sensing distance of switch may be coded to any Dupline transmitter oper- the inductive proximity Dupline channel by means ates in the same way as the switch the respective chan- of the programmer GAP commonly available pro - nel will be activated. 1605 and the adapter ducts of a similar kind. Once ADAPT 1605. Operation Diagram Dupline carrier Sensor activation Transmission Wiring Diagram Channel Programming G 6110 1145 Brown Blue Black G 6110 1145-1 White Black G 6110 1145 Blue Brown S: Signal wire Dimensions 55 57 M12 x 1 4 4 24 M18 x 1 x 30 24 M18 x 1 x 30 Plug version Cable version Accessories Programming adapter box needed ADAPT 1605 or GTS-CAB (only for G 6110 1145-1) 2 Specifications are subject to change without notice (30.01.2007) Dupline is a registered trademark. A product of the CARLO GAVAZZI Group