GP62890002-US Carlo Gavazzi

Dupline Car Park System Type GP6289 000x-US Passive LED Indicator for Sensor Low current consumption Passive indicator for sensor No programming. Just hardware connected GP6289 0001-US is passive red/green LED indicator GP6289 0002-US is passive red/blue LED indicator GP6289 0002-US is specially designed for reservation purpose cULus approved Product Description Ordering key GP 6289 000x-US The passive LED indica- The passive sensor is nor- Type: Dupline tor for sensor is part of mally mounted outside the Housing the car park system which parking bay so that a passing Input type contains other variants vehicle can easily identify the Channels of sensors, passive dis- status of the parking bay. Inputs plays and monitor modules. The GP6289 0002-US LED The GP6289 000x-US is a indicator is particularly passive LED indicator made designed for reservation of as indicator for sensor parking bays. GP6240 2224 724-US. Input/Output Specifications Type Selection RJ12 connector Not in use GP6289 0001-US Passive red/green LED indicator GP6289 0002 US Passive red/blue LED indicator 2x3-pin connector Not in use 1x2-pin connector Connector must be con- nected correctly from dot General Specifications to dot etc. Water and condensation-resistant The bottom part plus If the wire connection is LED indicator has been reversed the LED will show designed in a such a the oppocite. E.g. occupied way that water entering bay will show green (blue) from the ceiling flows and free bay will show red. right through the LED Se drawing Example of indicator and out of connection. small holes in the trans- parent part of the LED indicator without getting Environment in contact with the elec- tronic board and without Protection: IP 34 doing any damage. Operating temperature: -40C to 70C (-40F to 158F) LED indication: Storage temperature: -40C to 85C (-40F to 185F) Occupied: Red LED continuously lit Pollution Degree: 3 (IEC 60664) Space available: Dimensions: 118 x 76 mm GP6289 0001-US Green LED continuously Material: The case is made of polypropylene. The sensor lit lid is made of clear Polycarbonate. Reserved: GP6289 0002-US Blue LED continuously lit Supply Specifications Approval cULus (UL60950) MTBF > 400,000 hours Power supply: Powered from sensor module GP6240 2224 724-US Max. supply current 5 mA Power consumption: < 0.7 Watt Specifications are subject to change without notice (26.09.2016) 1 GP6289 000x-US Mode of Operation GP6289 000x-US is a passive LED indicator used for status Parking spaces indication of a parking bay and is located outside the space. The indicator is connected to the appropriate sensor by means of a 2-wire cable. The indicator is a passive unit, with no possibilities of adjust- ment or interface. Sensor Sensor LED indicator Max. 4.0 m Min. 1.5 m LED indicator The sensor can operate in a 4 m long and 2.0 m wide parking bay Bottom part: mounted in ceiling Dimensions 118 mm 76 mm Example of connection GP6240 2224 724-US GP6289 000x-US Not in use Programmable connector for GP 7380 0080 D+ D- Pow Pow D- D+ X X Y Y 2 Specifications are subject to change without notice (26.09.2016) 0.3 m